FENCE RULES – MARTINSVILLE (CITY), INDIANA
OVERVIEW
This page applies to residential fence work within the municipal boundaries of the City of Martinsville, Morgan County, Indiana. City zoning and approval requirements apply alongside Indiana law and property-specific restrictions.
Martinsville combines a six-foot fence limit in residential and B1 districts with City review of fence plans, materials, height, and location. Fences and hedges may occupy required yards, but public rights-of-way, a five-foot separation from pavement, and intersection visibility areas constrain placement. The code does not publish a general fence-to-property-line setback or separate ordinary standards for wood, vinyl/PVC, and chain-link. Historic Downtown property, pools, flood hazard areas, drainage corridors, and recorded plats can change the approval or construction requirements. Updated November 2026.
| Quick question | Martinsville answer |
|---|---|
| Permit or approval | Fence plans are subject to City approval through the Improvement Location Permit framework. A separate ordinary-fence building-permit trigger or height exemption is not specified. Historic, floodplain, pool, and other site approvals can also apply. |
| Typical fence height | Six feet in residential and B1 districts, without a separate front/side/rear split in the fence provision. Intersection visibility and pool-barrier rules add different conditions. |
| Placement & property lines | Fences may occupy required yards. No general numeric fence-to-property-line setback is specified. Keep clear of public rights-of-way, the five-foot pavement margin, required sight areas, and applicable easements. |
| Common fence materials | Wood: not specifically addressed for ordinary residential fencing. Vinyl/PVC: not specifically addressed. Chain-link: not specifically addressed for ordinary residential fencing. City approval of materials and design applies. |
| Important local conditions | Fence rules may be further affected by intersecting streets or access easements, Historic Downtown review, pools, special flood hazard areas, legal or regulated drains, recorded plat conditions, planned developments, fire access, agricultural boundaries, and private restrictions. |
| Official local resource | City of Martinsville Building Services |
The table above is for quick reference. Additional fence-rule details appear in the corresponding sections below. Before purchasing materials or beginning construction, read the sections that apply to the property, review the linked official sources, and confirm site-specific questions with City Building Services or the responsible office identified for that issue.
GOVERNANCE
Martinsville regulates residential fences principally through Chapter 94, Zoning and Subdivisions, of the City Code of Ordinances. Related requirements appear in Chapter 42, Flood Damage Prevention; Chapter 70, Streets, Sidewalks and Other Public Places; Chapter 74, Stormwater Management; property-maintenance provisions; and fire-access requirements. The City uses its own advisory planning framework.
City Building Services handles building and zoning administration, permits, subdivisions, variances, and related project review. The zoning ordinance assigns Improvement Location Permit administration to the City Superintendent or appointed agent. The City Engineer determines specified sight-distance and engineering matters. The Plan Commission handles planned developments, subdivision approvals, and Historic Downtown review; the Board of Zoning Appeals handles variances, special exceptions, and zoning appeals.
For municipal floodplain review, the City Engineer is the Floodplain Administrator; the City Superintendent acts in that role when the Engineer is absent. The Board of Public Works and Safety administers applicable stormwater requirements. The Morgan County Surveyor and Drainage Board administer regulated-drain matters within their statutory authority. The Fire Department administers applicable fire-access gate and emergency-access requirements. Indiana agencies retain their separate floodway, construction-stormwater, highway, and underground-utility responsibilities.
PERMIT AND APPROVAL REQUIREMENTS
• Fence plans and City approval: Section 94-39(D)(1) requires screening and fencing type, height, materials, and location to be included on any Improvement Location Permit plan. Those features are subject to City approval, and the City may require changes necessary to protect adjacent property or the public. Section 94-130 requires an Improvement Location Permit before permanent improvements and other listed alterations to land or structures begin.
• Application information: Section 94-132 calls for a scaled, dimensioned site plan identifying the owner, legal description, recorded subdivision plat where applicable, and existing and proposed improvements, including fences. The plan also addresses easements, platted setback lines and rights-of-way, adjacent land uses and streets, access points, drainage patterns, and relevant streams, ditches, floodways, or floodway fringes. Rivers, streams, creeks, and ditches on or within 75 feet of the property are to be shown. Three complete sets of construction plans are specified; a professionally prepared site plan must also be supplied electronically in a City-approved format when required.
• Professional site plans and minor work: The City Superintendent may waive surveyor or engineer preparation when an improvement is sufficiently minor. A professionally prepared plan is mandatory for a new principal building. Separate waiver conditions for accessory buildings and additions in AG, RR, R1, and R2 districts include at least one-and-one-half times the applicable setback, no evidence of utilities or easements within or near that setback, and agreement by the Superintendent and Engineer. Those accessory-building conditions are distinct from the discretionary minor-improvement waiver.
• Improvement Location Permit fees and timing: Section 94-130(B) states that no fee is charged for improvements to individual R1 and R2 lots. The general fee table separately lists a $75 residential Improvement Location Permit fee. Confirm the applicable lot classification before payment. Under Section 94-134, an issued permit becomes void if construction does not begin within 12 months, 50 percent of the plan is not completed within 24 months, or all improvements are not completed within 36 months.
• Building-code administration: Indiana’s currently effective residential framework is the 2020 Indiana Residential Code, incorporating the 2018 International Residential Code with Indiana amendments. Indiana replaced model Section R105; it supplies no statewide seven-foot fence-permit exemption. Martinsville’s published fence provisions establish the fence-plan and zoning-approval relationship but do not specify a separate ordinary-fence building-permit height trigger or exemption.
• Historic Downtown property: Section 94-228 requires a permit to construct, alter, change, improve, or repair a lot, building, or sign in the Historic Downtown District. Applications go to the City Superintendent. Building Services and the Plan Commission administer the applicable review. The district covers nine blocks bounded by the south side of Pike Street, west side of Sycamore Street, north side of Jackson Street, and east side of Mulberry Street.
• Special flood hazard areas: Chapter 42 expressly includes erection of walls and fences in floodplain “development.” A floodplain development permit is required before development begins in the City’s identified special flood hazard areas. Applications to the Floodplain Administrator cover work wholly within, partly within, or in contact with an identified hazard area. Scaled plans must describe the project and show its location, dimensions, elevations, grading, drainage, and relevant existing or proposed improvements. Additional information depends on the project.
• Floodways and fringe: Section 42-41 requires applicable Indiana Department of Natural Resources approval, or evidence of a qualifying general license or exemption, before local floodplain approval. Fringe development may receive a local permit when the chapter’s conditions are met. Indiana’s agricultural-fence floodway exemption applies only to a qualifying animal-containment fence that does not obstruct water or debris flow; ordinary privacy fencing remains subject to the applicable floodway rules.
• Flood areas with incomplete mapping: Where an identified floodplain lacks established floodway/fringe limits and the upstream drainage area exceeds one square mile, the applicant must forward the application and plans to DNR; local action awaits the required DNR approval, qualifying-license evidence, or floodplain analysis/regulatory assessment. With an upstream area less than one square mile, the applicant must provide an engineering analysis establishing floodplain limits and the one-percent annual-chance flood elevation. For a proposed site near a waterway with no mapped special flood hazard area, the Administrator verifies the drainage area; an area exceeding one square mile triggers the ordinance’s DNR referral and approval/assessment process. The permit must satisfy the applicable local chapter and DNR conditions.
• Construction stormwater and larger projects: State law effective May 1, 2025 limits local construction-stormwater requirements to the Indiana Department of Environmental Management’s Construction Stormwater General Permit standards, subject to the statute’s exceptions. Under the current IDEM construction-stormwater framework, permit coverage generally applies to disturbance of one acre or more and to smaller work within a larger common plan of development or sale that meets the program’s criteria. Construction-stormwater review for a stand-alone fence project depends on that framework and the work’s actual scope. Drainage facilities, recorded easements, floodplain development, and other separately applicable approvals also require attention.
• Public right-of-way work: Sections 70-42 and 70-43 require the applicable City license and City Engineer permission for work or excavation within City rights-of-way. A work permit identifies the authorized purpose, extent, duration, and standards. The homeowner tree-planting exception concerns qualifying trees; fence placement remains subject to the fence-specific right-of-way prohibition.
• Pools, access gates, and special approvals: Pool projects and barriers have the distinct local and state requirements described below. Gates across regulated fire-access routes require Fire Department review under Section 38-123. Approvals imposed through a recorded plat, planned development, variance, special exception, drainage consent, or highway authority remain project-specific.
FENCE PLACEMENT RULES
• Required yards and property lines: Section 94-33(B)(1) expressly permits fences, hedges, and retaining walls in required yards, subject to the rest of the ordinance. The ordinary fence provisions do not specify a general numeric fence-to-property-line setback. The legal boundary, public right-of-way, pavement margin, easements, visibility areas, and approved plan remain separate location controls. A tax map, mowing line, ditch, or existing fence is not a substitute for the legal boundary.
• Street and alley edges: Section 94-39(C)(3) prohibits fence placement on public right-of-way. Section 70-3 also prohibits fences obstructing a street, alley, sidewalk, or other public way. Section 94-33(M) bars fences, walls, barriers, and other obstructions within five feet of the pavement edge of a public street, road, or alley, except mailboxes with breakaway posts. That provision also covers described or platted private access easements serving two or more parcels or lots.
• Intersections and access easements: Fence placement must preserve the clear-vision geometry and City Engineer’s sight-distance requirements detailed under FENCE HEIGHT AND VISIBILITY RULES. The operative provision includes intersecting streets, roads, alleys, and access easements used by vehicles or pedestrians.
• Recorded plats, utilities, and drainage: Section 94-204’s plat-dedication provisions reserve utility easements and prescribe restrictions on permanent and other structures within them, with corresponding drainage-easement language. The recorded instrument and approved plat determine the particular burden on a lot. City stormwater provisions also require owners to maintain approved drainage facilities and easements. Fence placement must preserve applicable access and drainage obligations.
• Legal and regulated drains: Section 94-33(L) prohibits permanent structures within 75 feet of the centerline of a legal tile ditch or existing top edge of a legal open ditch as determined by the County Drainage Board. State IC 36-9-27-33 separately provides a regulated-drain right-of-entry corridor measured at right angles from a tiled drain’s centerline or the top edge of each open-drain bank, as determined by the County Surveyor. Permanent structures in that right-of-way require written Drainage Board consent. Temporary structures must be removed immediately when ordered; trees, shrubs, and woody vegetation require written consent. For fence or wall work beside a legal drain, confirm the applicable corridor and location with the City Engineer, County Surveyor, and Drainage Board.
• Authorized regulated-drain reductions: For the statutory class of new regulated drains established after September 1, 1984 and urban drains, the Board may reduce the corridor to no less than 25 feet from each open bank or 15 feet from a tiled-drain centerline. In a platted subdivision, a further tiled-drain reduction requires the Surveyor’s recommendation and cannot be less than seven feet on each side or less than that recommendation. Existing qualifying public-utility use is preserved. The property’s authorized corridor governs.
• Floodplain and floodway placement: A fence or wall within the applicable special flood hazard area is regulated development. Chapter 42 also identifies fences and walls as possible obstructions where they affect flow or collect debris. In mapped floodways, development must meet the ordinance’s no-increase standard unless the required conditional map revision and related approvals are obtained; an increase affecting a structure cannot receive that conditional revision. DNR-identified floodways not yet shown on the effective FEMA map use the ordinance’s separate cumulative-impact standard, including its 0.15-foot adverse-effect criterion. The Floodplain Administrator determines the applicable project review.
• Planned developments and screening commitments: Approved development plans, recorded commitments, and continuing plat conditions may govern particular fence locations or screening. Under Section 94-61, when the Plan Commission approves residential development abutting a listed special use, the residential developer must construct and provide for maintenance of the screening; the Commission determines its type and dimensions as part of zoning or plat approval.
• Fire access and equipment: Section 38-123 provides Fire Department approval for applicable gates or barricades across fire-apparatus access roads, trails, or access ways. Specified keyed or swipe-card access requires an approved key switch keyed to the Fire Department system at the approved location. Fences, bushes, trees, walls, and other objects must not obstruct applicable fire-department connections.
• Adjoining enclosures and boundary fences: In the adjoining-enclosure circumstances governed by IC 32-26-2, consent is required before a person enclosing previously unenclosed property joins a new fence to another owner’s existing fence. If an existing fence becomes a partition fence through that enclosure, the person enclosing the land must pay 50 percent of the existing fence’s value as estimated by its owner, subject to the statutory recovery process. If consent to join is withheld, each owner gives land equivalent to half the width of a lane, or a reasonable distance, for the second fence. A person ceasing use of land or opening an enclosure must give the required six months’ notice before removing a fence portion forming a partition with another person’s enclosure. These provisions address their specified boundary/enclosure circumstances.
• Indiana 811 notice before post-hole digging: Before covered digging, augering, drilling, driving, or other fence-post excavation, submit a locate notice through Indiana 811. Notice must be received at least two full working days and no more than ten calendar days before work. A working day is 7 a.m.–6 p.m. Indianapolis time, excluding Saturdays, Sundays, and state or national legal holidays. The normal lawful start is no earlier than 7 a.m. on the next working day after two full working days have elapsed following receipt. Earlier work requires the statutory electronic positive responses from all affected operators showing their facilities marked or no affected facilities.
• Indiana 811 responses, markings, and ticket life: Check the affected operators’ responses and markings, and affirmatively acknowledge receipt of the required operator information through Indiana 811 before starting. The notice expires at 11:59 p.m. Indianapolis time 20 days after its receipt date. Unfinished covered excavation requires a new request and the affected operators’ new markings before work continues or resumes. White lining is required when the proposed location cannot be supplied by street address, legal description, or the statutory highway-location method. Follow the Indiana 811 response and acknowledgment instructions.
• Narrow hand-tool exception: The statutory exception is limited to excavation performed solely with a hand tool, on property owned or controlled by the person doing the work, no deeper than 12 inches. Powered augering and deeper post holes fall outside those conditions. Utility notice and marking duties are separate from zoning, historic, drainage, floodplain, right-of-way, and private approvals.
FENCE HEIGHT AND VISIBILITY RULES
• Residential and B1 districts: Section 94-39(C)(2) limits any fence in a residential or B1 zoning district to six feet. The fence provision does not divide that maximum into separate front-, side-, and rear-yard limits or publish a separate fence-height measuring method, post-cap exception, or retaining-wall/fence combined-height calculation.
• Intersection clear-vision area: Section 94-33(M) requires a triangular space at each property corner where the covered streets, roads, alleys, or access easements intersect. Measure 25 feet from the right-of-way or easement corner along each respective line, then connect those points with a diagonal. The space must remain free of vision obstructions between three and 12 feet above established street grade. The same rule extends to the specified private access easements serving two or more parcels or lots.
• Additional sight-distance protection: A structure, landscaping, or fence may not be erected or maintained where, in the City Engineer’s opinion, it restricts intersection sight distance enough to endanger vehicles or pedestrians using the adjoining streets, roads, alleys, or access easements. The separate five-foot pavement margin also applies.
• Pool-barrier height: The City’s swimming-pool table specifies a protective fence or barrier at least 60 inches high, subject to its stated alternative and waiver provision. Indiana’s qualifying residential-pool access-control rule separately includes a wall/fence method at least four feet high. The respective pool definitions, alternatives, and gate conditions are described below; pool access control is a special-use requirement.
• Boundary hedges and live fences: IC 32-26-5 requires a hedge or other live fence grown along the line dividing separately owned properties to be cut and trimmed at least once each calendar year to no more than five feet high and three feet wide. Its written-complaint process provides for township-trustee examination within five days and a 30-day notice to trim and remove the brush, followed by the statutory enforcement process.
• Spite fences: IC 32-26-10 treats a fence-like structure unnecessarily exceeding six feet and maliciously erected or maintained to annoy an adjoining owner or occupant as a nuisance. Those purpose and necessity elements are part of the statutory rule.
MATERIAL AND CONSTRUCTION LIMITS
• Ordinary residential materials: Wood and vinyl/PVC are not specifically addressed as ordinary residential fence materials. Chain-link is also not specifically addressed for ordinary residential fencing; its express appearance in a day-nursery special-use requirement has that limited context. Section 94-39(D)(1) subjects fence type, height, materials, and location to City approval. The ordinary residential fence provisions do not publish a finished-side requirement, opacity percentage, picket-spacing rule, or material-specific barbed-wire, razor-wire, or electric-fence standard.
• Historic Downtown work: The district’s lot-improvement permit applies where Section 94-228 governs. Exterior-building design and original-building-material preservation requirements are separately published for buildings. Building Services and the Plan Commission determine the applicable review for the proposed lot work.
• Maintenance: Sections 14-141–145 require applicable residential premises and structures to remain free of safety hazards and unsanitary conditions, in good repair, and without deterioration or appearance that creates the stated blighting effect on adjoining property. Hazardous excavations and projections must be corrected.
• Mobile-home park facilities: Section 94-36 requires fences or free-standing walls where necessary around laundry areas, refuse collection points, sanitary facilities, sewage-disposal facilities, and playgrounds for resident screening and protection. Screening, fencing, and walls must be set back from sidewalks and streets sufficiently to preserve convenient and safe use; intersection visibility must be maintained.
• City pool enclosure: Section 94-60 lists a protective fence or barrier at least 60 inches high for the swimming-pool use and references 675 IAC 20-4-27(c), with an alternative for a power safety pool cover capable of supporting a prone adult at its center. The table permits a specific waiver by the Plan Commission or Board of Zoning Appeals. The City’s zoning definition covers swimming/bathing facilities above, on, or below ground, temporary or permanent, but excludes a facility whose maximum sidewall height is two feet or less.
• Indiana residential-pool scope: The current Indiana residential-code pool provisions in 675 IAC 14-4.4-38 replace model R326. A qualifying residential swimming pool includes an in-ground or on-ground pool capable of water depth greater than 42 inches, and every pool inside a residence regardless of depth, for the specified noncommercial use by no more than two owner families and their guests. Artificial lakes are excluded. R326.27.3 permits the following access-control methods:
• State wall/fence method: Walls or fencing at least four feet high must completely surround the pool and deck, except self-closing and latching gates and doors, both capable of being locked.
• State alternative enclosure methods: Other means at least four feet high may be used if the enforcing authority deems them impenetrable at construction and they completely surround the pool and deck when unused. A combination of the wall/fence and other-means methods is also provided. The specified self-closing, latching, and lockable gate/door conditions apply to the enclosure alternatives.
• State power safety cover: The cover must connect continuously to the deck to prohibit access when closed; require a key, key-and-switch, or personal-code touch pad for mechanical opening; have the necessary tracks, rollers, rails, guides, and accessories installed to manufacturer instructions; and bear an identification tag showing ASTM F 1346-91 (2018) compliance for power safety pool covers. The City table states the local 60-inch standard; current Indiana R326 provides the state access-control alternatives described here. For a proposed residential pool, Building Services must confirm how the local table is applied with current Indiana R326, including any applicable enclosure, waiver, or cover alternative.
• Qualifying agricultural partition fences: IC 32-26-9 applies only when at least one adjoining parcel is agricultural land: land zoned or designated agricultural, used for crops or livestock, or reserved for conservation. Its boundary-fence duty also has the stated location condition for property outside, abutting, or adjacent to a town or city corporate boundary. Where that framework applies, lawful partition-fence specifications include sufficiently tight and strong four-foot board/wire, wire, board, or picket fencing; four-and-one-half-foot straight rail; or five-foot worm rail, capable of holding the listed livestock.
• Agricultural fence allocation: Absent another applicable division, for a north–south boundary the eastern owner maintains the north half and the western owner the south half; for an east–west boundary the northern owner maintains the west half and the southern owner the east half. A qualifying different half maintained for at least five years may continue. Chapter 9 provides notice and township-trustee procedures, including the stated 20-day notices, for defaulted construction or repair.
• Qualifying agricultural boundaries at watercourses: Under IC 32-26-9-3(g), when a ditch or creek crosses the division line and adds expense to maintaining the part over the stream, owners who cannot agree on their proportionate shares have the partition fence apportioned by three disinterested citizens appointed by the township trustee. Where a ditch or creek forms, covers, or marks the boundary so the required fence cannot be maintained on the line, each owner must build and maintain a separate fence on that owner’s land as near the boundary as practical, at that owner’s expense. Where a stationary crossing is impracticable, floodgates or similar structures must be high, tight, and strong enough to turn the specified livestock, swing upward during high water, and connect continuously with the partition fences.
• Agricultural floodgate disagreements and default: IC 32-26-9-3(k)–(m) applies to the required floodgates or similar watercourse structures when their construction and maintenance add expense and the owners disagree over the kind of structure or their shares. On either owner’s written notice describing the disagreement, the township trustee must appoint three disinterested township citizens to determine the kind of structure and apportion its cost, taking account of the fence portions each owner maintains. A majority determination is final and binding. The arbitrators receive $2 each, paid in the same proportions as the allocated gate or structure expense. If either or both owners fail to construct or pay their determined share within 30 days after the determination, the trustee must proceed at once to construct the structure and collect the cost, including arbitrator compensation, from the defaulting owner under the ordinary partition-fence recovery procedure. Repair, rebuilding, or replacement must follow the determination. Under subsection (h), an interested trustee or one related to an interested owner is replaced by the trustee of another township residing nearest the fence.
PRIVATE RESTRICTIONS
HOA covenants, private subdivision restrictions, deed restrictions, architectural-review agreements, private easements, conservation easements, and recorded boundary or agricultural fence agreements operate independently of public approvals and may be more restrictive. Public plat conditions, utility/drainage easements, and regulated-drain rights-of-way have their own governing instruments and public administrators.
Under IC 32-26-3-1, adjoining owners choosing an arrangement for erecting, repairing, maintaining, or paying for a separating fence different from Article 26 must use a signed written agreement recorded in the county or counties where the properties lie.
REVIEW AND ENFORCEMENT CONTEXT
Fence issues are typically reviewed during permit or approval review when required, and through complaint-based code enforcement. Examples include:
• Fence plans and zoning: City approval of fence type, materials, height, and location; required Improvement Location Permit documentation; the six-foot residential/B1 maximum; and any approved variance, planned-development commitment, or plat condition.
• Visibility and access: The 25-foot intersection geometry and three-to-12-foot clear band, City Engineer sight-distance decisions, five-foot pavement margin, public-way obstruction, fire-access gates, and applicable emergency connections.
• Special property conditions: Historic Downtown lot-work permits; floodplain development and floodway review; legal/regulated drains; drainage and utility easements; maintenance duties; and construction-stormwater requirements within the current state framework.
• Pools and state fence law: The City’s pool enclosure table, current Indiana residential-pool access controls, qualifying agricultural partition fences, boundary live fences, and spite-fence nuisance provisions under their respective conditions.
• Excavation and utility protection: Indiana 811 notice, lawful start, response and marking checks, affirmative acknowledgment, notice renewal, and safe work around underground facilities.
USING THIS INFORMATION
This page provides general orientation on how residential fence rules are structured and applied within the City of Martinsville, Indiana. Updated November 2026.
In addition to local fence rules, certain Indiana laws apply statewide. See Statewide Fence Laws in Indiana.
It is not legal advice and does not replace official ordinances, permits, certificates, improvement-location approvals, development approvals, applicable building-code requirements, surveys, or professional guidance. Rules and interpretations may change, and application may vary based on zoning district, plan-commission jurisdiction, county zoning coverage, site conditions, subdivision/land-development status, easements, rights-of-way, floodplain or floodway status, stream conditions, stormwater or drainage requirements, regulated-drain conditions, road or highway conditions, INDOT jurisdiction, historic/design/special-district status, rural or agricultural context, livestock, lawful-fence or agricultural partition-fence context, live-fence or spite-fence conditions, local permit administration, pool-barrier use, Indiana 811 utility-excavation requirements, and private restrictions such as HOA covenants, deed restrictions, private agreements, recorded partition-fence agreements, or conservation easements. Before purchasing materials or beginning construction, confirm current requirements and site-specific limitations with City Building Services and any applicable private agreements. If this page conflicts with official ordinances, published guidance, adopted district guidelines, or direction from City Building Services or the responsible office identified for the issue, the official sources control. For legal advice or legal interpretation, consult a licensed attorney.