FENCE RULES – ST. CHARLES (CITY), MISSOURI

OVERVIEW

This page covers residential fences inside the incorporated City of St. Charles, Missouri, in St. Charles County. The city’s rules are separate from county zoning for unincorporated land.

St. Charles requires a permit for fence construction and replacement, with a published $25 fence-permit fee. Ordinary front-yard fences are limited to four feet and need open picket spacing; side and rear fences may reach seven feet. Secondary corner frontage and double-frontage lots have different placement rules, while intersection visibility imposes a much lower clearance limit. Materials, finished-side orientation and repair deadlines also matter. Historic districts add distinct approvals and designs, including Frenchtown’s lower street-facing height. Pool barriers, drainage, grading, animal enclosures and private restrictions can further shape the project. Updated November 2026.

Quick questionSt. Charles answer
Permit or approvalA permit is required for construction or replacement of fences. The fence-permit fee is $25; fences over 6 feet use the building-permit application. Historic and site approvals may also apply.
Typical fence heightOrdinary required-front-yard fences: 4 feet with gaps at least as wide as pickets. Side/rear fences: 7 feet. Historic districts, corners and pools have additional rules.
Placement & property linesNo general side/rear fence-to-lot-line offset is stated. Secondary corner frontage has a 10-foot property-line setback; corner visibility uses a separate right-of-way triangle.
Common fence materialsWood: recognized, subject to construction and district rules. Vinyl/PVC: not specifically classified in the general material list. Chain-link: recognized, but generally prohibited in required front yards; slatted chain-link is prohibited.
Important local conditionsFence rules may be further affected by historic designation, corner and double-frontage lots, pools, grading, floodplains, stormwater, easements and animal enclosures.
Official local resourceSt. Charles Building Division fence applications

The table summarizes ordinary rules. The sections below explain their applicability, exceptions and site-specific branches.

GOVERNANCE

St. Charles is a charter city, with its charter approved November 3, 1981. City zoning and locally adopted construction codes govern property within municipal limits. The Building Division in Community Development administers fence and building approvals at 636-949-3222. The city adopts the 2021 International Residential, Building, Swimming Pool and Spa, and Property Maintenance Codes with its own amendments. County amendments do not replace those city provisions.

The Director of Community Development administers floodplain regulation; the Director of Engineering administers grading. The Historic Landmarks Preservation and Architectural Review Board, called the Landmarks Board below, handles applicable historic approvals. The Historic Preservation contact is 636-949-3228. Public-way and fire-access permissions belong to their separately identified officials.

PERMIT AND APPROVAL REQUIREMENTS

• Construction and replacement permits: Section 400.550 requires a permit for construction or replacement of a fence. The published fence-permit fee is $25. The city routes fences over 6 feet through its building-permit application rather than the ordinary fence form. Replacement is not exempt merely because an older fence already occupies the location.

• Building-code thresholds: The adopted residential code exempts fences not over 7 feet from its building-permit requirement, while the city’s amended building code uses 6 feet. Section 500.060 applies the most restrictive ordinance/code requirement, and the city’s application instructions use the over-six-foot building route. Neither building-code exemption cancels the separate permit for fence construction or replacement.

• Historic approval before the permit: Fences in Historic Downtown and South Main Preservation districts, and all corner-lot fences in every superimposed historic district, need Landmarks Board approval under the fence ordinance. Other historic work follows the district and certificate rules below. A certificate of appropriateness is required before permit-required exterior alteration to a landmark or property in a historic district, and before a nonpermit alteration affecting a significant feature or appearance identified in the designation ordinance. The city’s Historic Preservation resources identify district guidelines and review.

• Historic review timing: The Landmarks Board reviews within 30 days unless the applicant agrees in writing to table the matter. Written decision notice follows within 7 days. A certificate is valid for 18 months, with just-cause extensions of no more than 12 months each. Distinctive features are repaired first; replacement matches design, color, texture and, where possible, materials.

• Which historic process applies: South Main and Historic Downtown require certificates for their specified structure/exterior changes. In the Extended Historic Preservation district, buildings constructed during or before 1945 are subject to the exterior-appearance-change review; later buildings follow the building-permit exterior-work trigger. Frenchtown and Commons distinguish contributing from noncontributing buildings. Vacant land follows the contributing process, while noncontributing review refers to the Extended Historic provisions. Landmark construction or alteration needs a certificate under the property’s approved standards, except routine maintenance or repair. Commons also requires a certificate for a new fence, a replacement of a different style, or building/replacing a retaining wall; normal maintenance is exempt.

• Grading: A grading permit is required for work in excess of 1 acre or in excess of 50 cubic yards. Exceptions include permitted basement/footing excavation and backfill without more than 50 cubic yards of fill; incidental improvement grading of no more than 50 cubic yards with immediate revegetation; authorized street, drain or utility work; and lawful farming, nursery or gardening that meets the conservation conditions. The general permit term is 1 year; a one-year renewal application is due at least 30 days before expiration. Fence work must meet the applicable trigger or exception.

• Floodplain development: A separate floodplain-development permit is required before proposed construction or development on the city’s mapped A/AE flood-hazard land. The Director of Community Development administers it. A floodway encroachment needs the engineering demonstration under §410.110 that flood levels will not increase. Drainage and flood conveyance must remain unobstructed; private covenants and easements continue to apply.

FENCE PLACEMENT RULES

• Ordinary side and rear lines: The city’s fence and residential site provisions state no general minimum side- or rear-line fence offset. Fences must be straight and parallel to the lot line. Corner, pool, historic, visibility, easement and other site conditions still govern the proposed location.

• Front yards and the principal entrance: A fence over 4 feet, or with gaps narrower than its pickets, cannot occupy a single-frontage lot’s required front yard or a corner lot’s frontage containing the principal entrance. The secondary-frontage exceptions below are separate from the entrance frontage.

• A double-frontage lot that is not a corner: A fence up to 7 feet may occupy the required front yard behind the building only if no portion of the same-street frontage in the block serves as the principal entrance of a main building on any lot. Its design, color and material must complement or match the principal structure’s color.

• Secondary frontage on a corner lot: The frontage not containing the principal entrance may have a fence up to 7 feet, set back at least 10 feet from the property line. The intersection sight triangle still applies. This exception does not extend to the principal-entrance frontage.

• Utility easements and public ways: Section 505.160 prohibits improvements in public utility easements but expressly excludes fences from that definition. Recorded easement terms and access rights remain independent. Obstructing a public right-of-way needs prior written permission from the Director of Public Works; the sidewalk/curb strip must remain unobstructed. Fire access cannot be obstructed by fencing without the fire code official’s approval.

• Stormwater and retaining walls: The owner must ensure the fence does not block or obstruct stormwater. Under the grading specifications, slopes are ordinarily no steeper than 3 horizontal to 1 vertical, with the stated exceptions for seeded/mulched slopes under 3 feet, rock and approved walls. A retaining wall over 6 feet under those specifications requires a protective fence or barrier. That protective requirement does not set the ordinary yard-fence height.

• Pool and deck setbacks: For residential and A districts, and dwelling properties in C-1, Historic Conservation and Central Business districts, a pool must be outside required yards other than the rear yard and at least 6 feet from side and rear lines. Rear placement on a double-frontage lot is allowed only where no same-street frontage in the block serves a main building’s principal entrance; the pool must meet half the required front setback. A deck must be at least 5 feet from an adjoining line. This deck definition covers constructed abutting access, lounge and walkway areas but expressly excludes paved surfaces, including paving blocks, bricks and similar surfaces. Pool and deck setbacks are separate from ordinary fence offsets.

• Boundaries and survey markers: A survey establishes the boundary; an old fence, hedge or mowing line does not establish it by itself. A surveyor’s real property report is not a boundary survey for locating a new fence. Missouri §60.355 protects public-land corners, property markers, benchmarks and survey-control monuments from knowing movement, removal, defacement or destruction, except by a registered land surveyor. Violation is a class B misdemeanor. The statute provides restoration-survey costs and the affected owner’s stated attorney-fee remedy.

• Before digging fence-post holes: Missouri’s underground-facility law covers digging, augering and driving on private land as well as public property. Under §319.026, notice to the notification center is required at least 2 working days, but no more than 10 working days, before expected excavation. Missouri 811 is the notice service. The two-working-day period begins at midnight following receipt; Saturdays, Sundays and legal holidays do not count. The notice supplies the excavator and responsible-person contacts, location, expected start, depth, type of work and other required details. Utility marks do not establish a property boundary or permission to use another person’s land.

• Locate responses: Operators ordinarily respond within two working days unless the excavator agrees to extend the scheduled start. Work cannot start before the scheduled date unless all facilities have been confirmed located. If an operator has not responded to a proper original notice, §319.030 requires a second no-response notice before excavation. The operator then has 2 hours to mark or contact the excavator with when marking will occur. A notice received by 2 p.m. requires marking that working day; a later notice requires completion by 10 a.m. the next working day. Only failure of the statutory mark-or-contact requirement permits starting under that exception. Careful and prudent excavation remains required.

• Ticket life and usable markings: Under §319.025, the notice remains operational through 11:59 p.m., 21 consecutive calendar days from the work start date. If work does not begin within ten working days of the request, a relocation request is required before starting. Preserve visible marks; unusable marks require a remark request using the original notice period. The ordinary approximate-location strip is the facility width plus 2 feet on each side, with a wider designation for the specified unusual locating conditions. Determine appropriate practices for confirming horizontal and vertical location and use hand or soft digging where possible. An unmarked or incorrectly located facility must be reported through the notification center; the operator has two hours to contact the excavator or locate it correctly.

• Damage during excavation: Report facility damage, dislocation or disturbance, including damage to trace wires, protective encasements or stakes, to the notification center. Contact or damage causing a hazardous-liquid or gas release requires an immediate 911 call. Do not conceal damage or attempt repairs without the facility owner’s authorization. The narrow allowance for emergency temporary sewer repairs after reporting is to prevent further damage and does not cancel notification. For an excavation necessary because of a statutory emergency, all reasonable precautions to protect facilities remain required, and notice must be given as soon as practical. Within two hours, the operator must mark or contact the excavator with immediately available information and, if unable to mark within that period, state when it will mark. Excavation in a state highway or its right-of-way also requires the Missouri Highways and Transportation Commission permit under §319.025, subject to its railroad-right-of-way exception.

• Removing a division fence: Under Missouri’s general partition-fence system, §272.120 requires all owners’ consent before removal of a division fence, except to open a public road or highway. Section 537.350 separately requires six months’ written notice to the adjoining field owner for its partition-fence removal or opening branch where the adjoining fields are cultivated. It also addresses voluntarily opening or throwing down another enclosure’s doors, bars, gates or fences and leaving them open or down. The consent and written-notice duties are separate. Section 537.350 provides $5 plus double actual damages and costs. Section 537.360 limits covered recovery to single damages and costs when there was probable cause to believe the land or thing was the defendant’s own. Specialized watercourse/log-driving exceptions are separate from ordinary yard-fence removal.

FENCE HEIGHT AND VISIBILITY RULES

• Rural fields where livestock are kept: Where Missouri’s general partition-fence system applies, §§272.010–272.020 require a lawful fence for fields and enclosures where animals are kept. A lawful fence consists of posts and wire or boards at least 4 feet high, agreed upon by adjoining owners or determined by the associate circuit court. Posts must be firmly set no more than 12 feet apart, with wire or boards securely fastened and spaced to resist horses, cattle and similar livestock. County local-option rules and private agreements can affect shared-fence duties; these agricultural provisions do not raise a local residential fence-height limit.

• Front-yard height and openness: An ordinary fence or wall in the required front yard may be at most 4 feet high, with gaps between pickets at least as wide as the pickets. A taller fence or one with narrower gaps follows only the specific secondary-frontage exceptions above.

• Side and rear height: Side and rear fences may be at most 7 feet high, regardless of picket spacing. The fence provision does not specify a separate grade-measurement method. For a sloping proposal, the Building Division can identify the applicable measurement for the submitted plan. Customary tennis/recreational-amenity fencing is exempt from the fence-height limit only; other requirements still apply.

• Intersection visibility: Within the corner triangle, fences, walls, hedges, plantings and structures cannot be more than 18 inches above established street grade. The triangle is formed by the intersecting street right-of-way lines and a line joining points 30 feet from their intersection. Measure along the right-of-way lines, not pavement edges.

• Frenchtown street-facing fences: New or replacement fences at the front of a house, and along the sides running beside a public street, may be no more than 3½ feet high under the Frenchtown guidelines. This lower district limit remains relevant even where the general city rule would allow four or seven feet.

MATERIAL AND CONSTRUCTION LIMITS

• Livestock outside the enclosure: Missouri §270.010 prohibits an owner from permitting horses, mules, asses, cattle, swine, sheep or goats to run at large outside the owner’s enclosure. Anyone may restrain them, and law officers must. If the owner is known, written notice must be given within 3 days, stating feeding/keeping compensation and claimed damages. The owner owes reasonable taking-up, keeping and feeding compensation plus actual damage. For a public-road or highway accident, the statute preserves a defense where the owner establishes no fault or negligence. The stray-law route applies when the owner is unknown or a notified owner fails to pay taking-up, feeding and keeping compensation; unpaid damages alone do not trigger that route.

• Wood: Wood is expressly recognized in the fence construction provisions and several historic design options. Its appearance, upkeep, location and any applicable district design requirements remain controlling.

• Vinyl/PVC: The general fence-material list does not specifically classify vinyl or PVC. Any design must still meet the general construction rules and applicable historic standards.

• Chain-link: Chain-link is recognized, but is prohibited in the required front yard except on a corner lot’s non-principal-entrance frontage, where the corresponding placement/height conditions apply. Slatted chain-link is prohibited. Historic district and pool requirements add their own restrictions.

• Supports and material combinations: Horizontal and vertical supports must face inside the enclosure or be hidden from neighbors and public view. A fence may use no more than 2 material types; examples include wood with chain-link or two wood types. Cloth, slatted chain-link, sheet metal, corrugated metal, metal scraps, canvas and similar materials are prohibited.

• Residential wire and electric fencing: Barbed wire, single-strand wire, wire mesh, wire grid and chicken wire are prohibited on a residential property’s perimeter or boundary. Fences/enclosures charged or designed to be charged with electric current are prohibited. The interior hen-run and concealed electronic dog-containment rules below are separate, limited provisions.

• Maintenance and missing pieces: The owner must keep the fence upright and maintained, and remove one that is unsightly or a public safety, health or welfare menace. Missing boards, pickets or posts must be replaced within 45 days with the same type and quality. A painted or surface-finished fence must be maintained as originally designed. Exposed steel, other than galvanized fences, needs a colored protective finish against corrosion. The property-maintenance code separately requires fences and walls to remain in good repair.

• Frenchtown fences and screening: Fences and screen walls must remain in good repair. Chain-link cannot be placed in front of a house or property, or used to screen mechanical equipment. Mechanical equipment, including window air conditioners and heat pumps, must be screened from street view. Porch-screen lattice is unsuitable as fencing, though suitable for equipment/trash screening. A gangway may be fenced or gated using a model example; decorative fencing is encouraged.

• Frenchtown walls and steps: Retain and repair walls and steps. Reconstructed walls replicate the original or a period design; other reconstruction needs a model example. Landscape timbers are unsuitable for retaining walls and steps. Existing brick walls are retained and kept free of weeds.

• South Main fence and gate design: Original site features are preserved where feasible. A fence or gate removed or destroyed during construction must be replaced in a form suited to the historic character. The guidelines offer these design options: 6- or 8-inch vertical boards with an optional molded top rail; 2½-inch picket faces at 5-inch centers with pointed or molded tops; or 6- or 8-inch horizontal boards with a same-size flat top rail. Horizontal fences should not front dwellings. Wrought-iron balusters ⅞ or 1 inch square at 5-inch centers, with an iron top rail or ornamental cast baluster, are an option only with nineteenth-century structures. These are design options, not dimensions required of every fence; applicable city height and openness rules continue to govern.

• South Main retaining walls: Replacement retaining walls use the specified common or water-struck red brick, or quarry-face limestone, with raked/brushed joints at least ½ inch. Concrete is not allowed for that replacement.

• Commons fences and lattice: The Commons guidelines recommend period-consistent front fences, including wood pickets, vertical boards, wrought/cast iron, masonry or vegetation. Chain-link and wire are inappropriate in front. Heavy-duty lattice is allowed; thin/lightweight lattice is not. Fences must remain in good repair, with designed paint, stain or treatment maintained. Screening new mechanical equipment from street view is recommended. City openness and height rules still apply to any proposed guideline design.

• Commons retaining walls and steps: Walls over 2 feet should be masonry; poured concrete is encouraged to have raked joints resembling blocks. Walls 2 feet or less may use masonry or treated landscape timbers. Cinder block and tires are inappropriate exposed finishes at any height. Maintain walls and steps; reconstruction should fit the period. Alternative step designs need a scale drawing or model. The certificate requirement for wall construction/replacement is described above.

• Extended Historic and Historic Downtown design: Extended Historic review preserves beneficial topography and vegetation. Service yards and unsightly areas are screened with walls, fences, planting or combinations effective in both winter and summer; appropriate walls, fences and paving may be used where planting will not prosper. In Historic Downtown, a parking lot adjoining a public sidewalk has a separate recommendation for edge screening, including fences or walls with materials complementing nearby historic buildings. That parking-lot guidance does not require every home to install a perimeter fence.

• Pool covers and construction fencing: Outdoor pools and spas and indoor swimming pools need compliant barriers under the adopted 2021 International Swimming Pool and Spa Code. A spa or hot tub with a qualifying lockable ASTM F1346 safety cover, or a pool with a qualifying powered ASTM F1346 safety cover, is exempt from §§305.2–305.7. In-ground pool and spa sites still require construction fencing at least 4 feet high, from excavation until the permanent barrier is complete.

• Pool barrier height and openings: A barrier under §305.2 must be at least 48 inches high, measured above grade on the side away from the pool around the entire perimeter and for 3 feet horizontally outside. The bottom gap is at most 2 inches over grass or gravel or 4 inches over a solid surface, measured on the side away from the pool or spa. If mounted on a pool wall, the gap between the wall top and barrier bottom is at most 4 inches. Openings cannot pass a 4-inch sphere. Solid barriers cannot provide handholds or footholds beyond normal construction tolerances and tooled masonry joints.

• Pool fence members and chain-link: When horizontal-member tops are less than 45 inches apart, horizontal members must face the pool, and vertical-member gaps and decorative cutouts are limited to 1¾ inches. When horizontal-member tops are at least 45 inches apart, vertical gaps may be 4 inches, but decorative cutouts remain limited to 1¾ inches. Chain-link openings cannot exceed 1¾ inches. The city prohibits slatted chain-link, so slats cannot be used to obtain that opening size. Diagonal-member openings are limited to 1¾ inches, and diagonal members cannot exceed 45 degrees from vertical.

• Removable mesh pool fencing: Mesh other than chain-link must follow manufacturer installation instructions. Its bottom must be no more than 1 inch above the deck, installed surface or grade. Clearance between the mesh bottom and solid surface must not allow the fence to lift more than 4 inches from grade or decking. No 4-inch sphere may pass beneath any panel, and the maximum bottom-to-solid-surface clearance is 4 inches from grade or decking. Each section’s attachment device must be at least 45 inches above grade; the code gives a hook-and-eye latch with a spring-actuated retaining lever as an example of attachment security. Hinged gates follow §305.3. Patio-deck post sleeves must be nonconductive. Mesh fencing cannot be mounted atop an onground residential pool, and its inside face must be at least 20 inches from the nearest pool or spa water edge.

• Pool gates and doors: Access gates and doors must accommodate a lock. Pedestrian gates and doors open outward, away from the pool or spa, and self-close and self-latch. Nonpedestrian utility or service gates and doors remain locked when not in use. Double or multiple doors and gates need at least one secured leaf and a self-latching adjacent leaf.

• Residential pool latch heights: An outside-accessed latch release that is not self-locking must be at least 54 inches above the finished floor or ground surface. For a self-locking key, electronic or combination mechanism, both the lock control and latch release must be no higher than 54 inches above the finished floor or ground surface. At private pools, a self-latching gate with its sole release on the pool or spa side must place that release at least 3 inches below the gate top. Openings in the door, gate and barrier within 18 inches of an inside latch release cannot exceed ½ inch in any dimension.

• Equipment outside a pool barrier: Equipment on the same lot, including pumps, filters and heaters, must be at least 36 inches from the outside of the barrier when located outside that barrier.

• A building wall used as the pool barrier: Where a dwelling or structure wall provides direct access to the pool, §305.4 allows specified protective alternatives. The alarm option covers doors, gates and the specified windows with sills below 48 inches above the indoor finished floor, using a UL2017 audible water-hazard entrance alarm. The city’s amendment applies this window branch to bedroom-egress windows with sills below 48 inches above the indoor finished floor. Alarm-deactivation controls must be at least 54 inches above the finished floor in dwellings not required to be Accessible, Type A or Type B units; in those accessible categories they must be 48–54 inches above the finished floor. Alternatives include a listed and labeled ASTM F1346 safety cover or approved equivalent protection, such as self-closing, self-latching doors.

• An onground pool wall used as the barrier: A pool wall used alone must have its bottom on grade and its top at least 48 inches above grade around the entire pool perimeter, meet §305.2 and be approved by the manufacturer for barrier use. A wall with a top-mounted barrier must place the top of the barrier at least 48 inches above grade around the entire pool perimeter, with both wall and barrier complying with §305.2. Access ladders or steps must be capable of being secured, locked or removed to prevent access, unless enclosed by a separate complying barrier. Openings created by securing, locking or removing them cannot pass a 4-inch sphere. Top-mounted barriers must follow manufacturer instructions.

• Natural pool-barrier alternatives: The natural-water-edge exception applies only where public access to the shoreline is not permitted and the required barrier extends at least 18 inches beyond the water edge. A natural-topography barrier needs governing-body approval and protection equivalent to §§305.2–305.5.

• Existing pools, spas and hot tubs: The city’s property-maintenance code separately covers private pools, hot tubs and spas containing water more than 24 inches deep. It requires a 48-inch barrier above finished ground level, measured on the side away from the pool and self-closing, self-latching gates. A release below 54 inches above the gate bottom must be on the pool side. Gates must positively close and latch when released 6 inches from the gatepost. Existing enclosures cannot be changed, removed or replaced so as to reduce effectiveness. This provision’s ASTM F1346 safety-cover exception covers spas and hot tubs; it does not state the new-construction code’s powered-pool-cover exception.

• Interior hen runs: Hens are allowed in residential districts and on dwelling properties in other districts: up to 8 hens on a lot of 7,000 square feet or less, plus one hen per additional 2,000 square feet, to a maximum of 12. An interior rear-yard run may use wire mesh, wire grid or chicken wire, be at most 6 feet high and provide at least 10 square feet per hen. Keep it 10 feet from property lines and 25 feet from another residence. Coops have a separate 100-square-foot maximum and 4-square-foot-per-hen minimum. Maintain drainage and sanitation. This interior-run allowance does not authorize prohibited perimeter-wire fencing.

• Residential beekeeping: A resident owner on a lot of at least 10,000 square feet may keep no more than 5 hives under the stated conditions. A 6-foot sight-proof fence is required, with the hive hidden where possible. Supply water within 5 feet; the hive must be at least 20 feet from property and right-of-way lines, with its opening facing the most distant line. Intersection visibility requirements still apply.

• Dogs and electronic containment: Dogs must be confined by a fence or a tether at least 10 feet long that prevents access to the right-of-way. Electronic-only containment must be at least 25 feet from the public right-of-way abutting any yard. More than two crossings triggers the ordinance’s vicious classification.

• A dog classified as vicious: A vicious dog must be indoors or in a secure locked pen/structure with a secure top and sides, plus an attached bottom or sides buried 4 feet. The enclosure must be locked by key or combination while occupied, provide weather protection and comply with zoning/building requirements. Warning letters must be at least 4 inches high at entrances and enclosure sides.

• Dangerous wells or excavations: On an unenclosed lot with a well, cistern or deep/dangerous excavation, the owner or occupant must maintain a close, secure and substantial fence or cover to prevent people or animals falling in.

• State onsite-system acreage conditions: Missouri §701.031 excludes the owner of a single-family-residence lot of at least 3 acres, or the owner of a residential lot of at least 10 acres with no single-family-residence onsite sewage system within 360 feet of any other onsite sewage system and no more than one single-family residence per ten acres in the aggregate, from the stated state onsite provisions only when the remaining conditions are met. The exclusion does not cover lots adjacent to lakes operated by the Corps of Engineers or a public utility. Every point of the system must be more than 10 feet from any adjoining property line. No effluent may enter adjoining property, contaminate surface water or groundwater, or create a nuisance as determined by a readily available scientific method. Section 701.047 permits more restrictive local standards. These state conditions do not waive the separate local sewage program. The state’s $90 onsite application fee is suspended from August 28, 2026; local fees are not suspended by that state action.

• An existing lawful lagoon: Where the state lagoon rule applies, the pond area needs a fence at least 4 feet high, made of welded, woven or chain-link wire no smaller than 14 gauge. Cattle or hog panels may be substituted with tee line posts. Posts must be pressure-treated wood, galvanized and/or painted steel, and driven, tamped or set in concrete. Line posts must be no more than 10 feet apart; corner posts must be properly braced. The suggested depths are 18 inches for line posts and 24 inches for corner posts. Construction must be sound with no bottom gaps or openings.

• Lagoon fence location and gate: The fence cannot be closer to the water’s edge at the 3-foot operating depth than the center of the berm. Placement exactly on the berm center is not required. The rule recommends that setbacks not exceed 30 feet from the water’s edge. A properly hinged 4-foot-high gate of comparable material needs an effective latch. A 36–48-inch gate width is recommended for mowing and maintenance access. The fence must be complete before dwelling occupancy. Post depths, maximum water-edge setback and gate width are recommendations; fence height, bracing, maximum line-post spacing and effective enclosure are requirements. These provisions do not authorize a new lagoon where local law prohibits one.

• Licensed family child-care outdoor areas: For licensed family child-care homes, an outdoor play area must be available on or adjoining the property, convenient and accessible without hazard. Fencing is required where needed to protect children from traffic, water or other hazards. Homes initially licensed after the rule’s effective date, and new fences installed at existing facilities, need a fence at least 42 inches high. Independently, all fences must prevent children from crawling or falling through, or becoming entrapped.

• Licensed family child-care pools: Swimming and wading pools must be fenced to prevent children’s access. For family homes initially licensed after the rule’s effective date, the pool fence must be at least 42 inches high with a locked gate. The state rule allows an above-ground-pool option of a 42-inch fence around the pool top with barricades at the steps to the pool deck. Applicable local pool rules can be stricter; the licensing provision does not reduce their requirements.

PRIVATE RESTRICTIONS

Recorded covenants, homeowners-association architectural requirements, private easements and boundary or maintenance agreements can impose duties separate from the city’s rules. A permit or certificate does not establish a property line, grant ownership of a shared fence, resolve a neighbor’s cost share, or authorize interference with recorded access. Fence age alone does not decide title, and a gate does not automatically make fencing across an easement lawful.

REVIEW AND ENFORCEMENT CONTEXT

Fence issues are typically reviewed during permit or approval review when required, and through complaint-based code enforcement. Examples include:

• Permit and historic review: Fence construction/replacement, taller-fence building review, district certificates, grading and floodplain development.

• Placement and visibility: Front and secondary frontages, corner sight areas, pool setbacks, public access and stormwater.

• Construction and upkeep: Restricted materials, supports, repairs, pool barriers and gates, and conditional animal or child-care enclosures.

• Private matters: Ownership, covenants, shared costs and easement disputes remain separate from city code administration.

USING THIS INFORMATION

This page provides general orientation on how residential fence rules are structured and applied within the City of St. Charles, Missouri. Updated November 2026.

In addition to local fence rules, certain Missouri laws apply statewide. See Statewide Fence Laws in Missouri.

It is not legal advice and does not replace official statutes, ordinances, orders, permits, certificates, development approvals, applicable building-code requirements, surveys, recorded documents or professional guidance. Rules and interpretations may change, and application may vary with the identified municipality, including its actual municipal or county class, charter, adopted program or special district, and each function’s verified territory, the authority responsible for each issue, current code requirements and amendments, zoning and site conditions, subdivision or plat conditions, easements, rights-of-way, drainage and floodplain requirements, historic or design districts, pool use, agricultural or livestock conditions, fence ownership and shared-fence duties, excavation requirements, and private restrictions subject to Missouri law. Applicable requirements depend on the property’s actual facts and the respective authority of the identified offices. Private agreements and recorded rights remain separate from government approvals. If this page conflicts with controlling law, adopted regulations or official requirements, the controlling authorities govern.