FENCE RULES – WILDWOOD (CITY), MISSOURI

OVERVIEW

This page covers residential fencing within Wildwood, Missouri, including homes with agricultural acreage. City limits and the property’s actual zoning district determine the local rules. Wildwood zoning approval and contracted St. Louis County building permitting are separate steps. Updated November 2026.

In the Non-Urban (NU) and listed residential (R) districts, a boundary fence six feet or less can occupy required yards only with the stated pavement clearance, visibility, front-yard opacity and materials conditions. City fence guidance says to obtain a County building permit above six feet or for a pool enclosure; the incorporated County permit exemption separately reaches eligible rear/side fencing up to seven feet. The affected six-to-seven-foot band requires the precise approval check described below. Deer fencing, Town Center designs, game courts, protected trees, floodplain property and private restrictions have their own conditions.

Quick questionWildwood answer
Permit or approvalCity zoning authorization remains required. City guidance directs County building permitting above six feet or around a pool; incorporated County 105.2 separately exempts eligible rear/side fencing ≤7 feet. Do not treat the affected band as unconditionally exempt.
Typical fence height≤6 feet for the ordinary required-yard allowance in NU/R districts. Qualifying NU deer fences may reach eight feet in required side/rear yards. Taller and special-purpose fencing has separate placement and review.
Placement & property linesKeep the ordinary required-yard fence at least 10 feet from a street’s pavement edge and outside the 30-foot property-line sight triangle. District setbacks, Town Center plans, easements and private restrictions also matter.
Common fence materialsWood: treated/simulated wood and approved composites. Vinyl/PVC: vinyl and vinyl-covered materials within the district rule. Chain-link: only vinyl or similarly coated under the ordinary NU/R allowance; Town Center architectural standards prohibit chain-link.
Important local conditionsFence rules may be further affected by the City/County permit distinction, front-yard opacity, deer enclosures, Town Center or architectural review, pools, historic resources, protected trees, grading, floodplain and private restrictions.
Official local resourceWildwood building permits and zoning authorization

The sections below explain how to apply these answers to a home fence, including the separate City and County approvals and conditions for the actual district and site.

GOVERNANCE

Wildwood is a charter, home-rule city; its charter was adopted November 4, 1997. The City Council adopts municipal rules, Planning handles zoning authorization and applicable architectural/tree/historic review, and Public Works administers grading, streets and floodplain requirements. St. Louis County performs the contracted building-permit and inspection functions identified by the City. That contract does not replace Wildwood zoning with unincorporated County zoning.

Current 500.020 and 500.035 incorporate St. Louis County Chapters 1115/1118 and 1116 under Ordinance 27,654, approved December 18, 2019 and adopted April 1, 2020, as amended. These adopt the 2015 International Building Code (IBC), International Residential Code (IRC) and International Swimming Pool and Spa Code (ISPSC) with County amendments. Wildwood’s former insertions/deletions were superseded by its 2024 adoption without City amendments. Section 500.110 separately incorporates County Chapter 1110 property maintenance under Ordinance 27,617, as amended. Apply the County technical provisions through these City adoptions and the actual proposed use.

PERMIT AND APPROVAL REQUIREMENTS

• City authorization and plans: The Municipal Zoning Approval—Fence form is expressly not a building permit. It requires the completed form, fees and an image/rendering showing fence type/material, together with a site plan, survey or aerial showing property lines and the proposed fence. Submit one electronic set or two paper sets; the City returns an approved copy in the submitted format for any County permit application. The form lists a $50 City fee, with a separate street-deposit field. City Hall is 16860 Main Street, 636-458-0440; MyGov zoning applications are linked from the City’s permit page.

• Six-foot guidance and seven-foot exemption: The City form says fencing exceeding six feet and/or surrounding a pool must use the zoning approval to apply for a County building permit. Incorporated County Building 105.2, Building item 4, separately exempts new/replacement fencing not more than seven feet in rear or side yards, except pool, spa and hot-tub enclosures. Electrified components, barbed wire, razor ribbon and like material lose that exemption at any height. The two official routes do not state the same threshold. For a fence over six through seven feet, obtain the required City zoning authorization and have Wildwood Planning and St. Louis County Permit Processing resolve the building-permit requirement before work; the City’s zoning height/yard rules remain independent. Neither a seven-foot building exemption nor a permit allows a seven-foot fence in a required yard that only allows six.

• Repair and existing fences: The incorporated repair exemption is conditioned on Building 105.2.2 compliance and does not cover damage arising from disaster or lack of ongoing routine maintenance. A legally installed fence predating the district’s 2022 amendment is treated as legal nonconforming subject to 415.460. Repair or replacement is not blanket permission to enlarge a nonconformity, disregard zoning authorization or remove required pool protection.

• Architectural review: Section 415.220 applies architectural review to covered construction or alterations in Town Center and other zoning districts, with the stated exception for single-family dwellings outside Town Center. Alterations/repairs not affecting exterior appearance and specified site-ordinance exemptions have separate treatment. A proposed fence classified as a structure, particularly one outside the ordinary required-yard allowance, needs Planning’s district/site-plan and architectural classification; do not assume every small repair requires Board review or that every accessory structure shares the dwelling exception.

• Retaining-wall permit conditions: County 105.2’s wall exemption is for no more than three feet from finished grade on the non-retained side to the wall top, reduced to two feet when supporting a surcharge or impounding the listed liquids. A permit is required if the wall is at or within its own height of the property line, or if the total wall plus top guard/fence exceeds six feet measured from that non-retained grade. City zoning authorization, grading and design requirements remain separate.

• Historic resources and certificates: Chapter 440 provides interim review for listed or potentially significant historic structures, elements and affected sites: ordinarily 30 days after referral, with a possible 30-day extension. For registered property, obtain the required certificate of appropriateness before covered exterior alteration, construction, demolition or removal; the actual designation identifies protected features and reviewed work. The Commission generally acts within 45 days of a complete application and gives written notice within seven days. Begin within six months; the certificate lasts 18 months and is renewable. The chapter preserves ordinary-maintenance limits and emergency public-safety action. An unsuccessful effort to reach an alternative after denial can lead to the stated Board of Adjustment appeal after six months. National Register listing alone is not substituted for the City’s actual designation and review rules.

• Nominated historic property: Section 440.040 provides the nomination, owner-consent and City Council designation process; the actual designation ordinance identifies protected features and reviewed work. Section 440.041 supplies the interim referral review described above. For a fence or grading project affecting a historic element or archaeological portion of a site, Planning and the Historic Preservation Commission are the official routes to the actual designation and applicable certificate or interim review.

• Grading permits and exceptions: Chapter 425 normally requires a grading permit from Public Works. The incidental-work exception is less than 15 cubic yards on a site of 20,000 square feet or less, or less than 30 cubic yards on a larger site, while prior grading/tree plans still apply. Other stated exceptions include qualified farming/gardening/landscaping in substantial compliance with local soil-conservation recommendations or standards, or private-road/brush/lawn maintenance, provided the grading does not remove or destroy more than 7,500 square feet of tree canopy in one year or less, and right-of-way work under its special-use permit. An occupied, ongoing single-family home lot has a residential land-disturbance exception below 2,000 square feet with erosion/runoff protection; inadequate protection can defeat it. These exceptions do not apply to grading in anticipation of or preparation for building construction, or construction/development requiring rezoning, site-plan approval or amendment, or subdivision.

• Grading application and security: The grading application includes the prescribed contour/plot/drainage and construction information, and a stormwater pollution prevention plan (SWPPP) for land disturbance greater than one acre. Covered work requires the City’s completion/restoration security; the cash escrow or approved bond is not a fence fee. The stated bond alternative is at least $25,000 per site, subject to City Attorney approval. Public Works and Planning determine the actual grading/security requirement and inspect compliance.

FENCE PLACEMENT RULES

• Ordinary required-yard allowance: In NU, R-1, R-1A, R-2, R-3, R-4 and R-6A, boundary walls/fences may occupy minimum yards only if no higher than six feet, outside the sight triangle, at least ten feet from any street pavement edge, built of the allowed materials and compliant with incorporated building/pool requirements. Front-yard opacity may be no more than 60% solid area measured over any ten linear feet. These are conditions of the yard exception, not a universal authorization to use the property line. Respect the surveyed boundary, recorded easements, plat and approved development plan.

• Taller fencing and underlying setbacks: A fence outside the six-foot required-yard exception must be evaluated through the actual structure/district requirements and any approved special-purpose exception. General front/side/rear setbacks are: NU 50/30/30 feet (front from roadway right-of-way or large-lot roadway easement); R-1 30/15/30; R-1A 25/12/30; R-2 25/10/30; R-3/R-4 20/10/30; and R-6A 20/10/15. R-6A separately allows five-foot side treatment for the unattached side/accessory structure of an attached single-family dwelling, with specific detached-garage three-foot branches; those are not an automatic ordinary-fence exception. Planning applies the structure classification, lot-specific exceptions and any architectural review.

• Deer-fence lots: In NU, a legal lot of record of at least five acres, or contiguous tracts under one ownership totaling at least five acres treated as one lot for this purpose, may use a qualifying deer fence in required side and rear yards. The defined enclosure is at most eight feet, of stable metal wire, polypropylene netting, taut wire or woven mesh that allows light/air and protects plants, gardens, landscaping, compost, sensitive land or crops from animals. This does not authorize eight-foot fencing in the front yard or make every privacy fence a deer fence.

• Other districts and approved plans: PS has its own six-foot boundary-fence required-yard exception; C-1, C-2 and M-1 have their particular yard exceptions, while planned C-8/M-3 and residential overlays may be governed by approved site-specific development plans. The ordinary NU/R allowance is not a substitute for those conditions or a permission to change an existing residential use’s zoning. Planning’s zoning authorization identifies the actual district and governing plan.

• Public trees and protected vegetation: No grading permit, plan/plat or authorization for a covered tree-disturbance project is issued before approval of its tree preservation plan. Chapter 410 applies to the stated grading/zoning work affecting trees protected on an approved plan/plat, grand trees/stands or specimen vegetation. For covered work, preserve at least 30% of canopy outside building setbacks; extra canopy is required when a driveway wider than 12 feet or utilities disturb setback areas. Diameter at breast height (DBH) is measured 4.5 feet above ground; the critical root zone extends at least one foot of radius per inch of trunk diameter. These duties do not make all routine trimming a permit project.

• Grand trees and restoration: Grand-tree thresholds are 24-inch DBH large hardwood, 12-inch large softwood or six-inch small tree, in fair-or-better condition. A grand stand has at least six trees each at least 12-inch DBH and at least 6,000 square feet of canopy. Disturbance needs the prescribed authorized-development or Tree Manual basis and Planning permit. Restoration alternatives include one-for-one replacement with 3–6-inch trees and a cumulative-caliper match that may be required if the selected replacement is less than 25% of the removed tree’s caliper, a stand of eight or more with matching cumulative caliper, or an acceptable professionally prepared benefits-replacement plan. Unauthorized disturbance must be restored within six months; retained trees failing to remain alive for at least 30 months after development of the site or stage ceases carry the stated rebuttable presumption and mitigation duty. The actual City Arborist/Planning review governs technical protection methods and the Tree Manual’s current dependent details.

• Public-tree protection: Do not attach unauthorized objects to, injure or impair public trees or their root zones. Construction/excavation in public right-of-way within 20 feet of a public tree requires protective fences, barriers or guards. Vegetation cannot obscure signs/lights or obstruct public travel or intersection views. These duties remain even where an ordinary fence or grading permit exemption applies.

• Grading, waterways and erosion: Keep land disturbance at least 50 feet from creeks, streams, runoff channels, ravines and other designated sensitive areas unless the stated approved-development modification applies. Land-disturbance restrictions also follow zoning/subdivision setbacks. Cut/fill faces are generally no steeper than 3:1; modifications require the actual written/site-specific justification and approval, not owner assumption. Protect adjoining land and streets from settlement or sliding; no fill may roll/wash onto another parcel without the owner’s written consent or onto public ways. Stabilize soil within five days of clearing or construction inactivity; seed/vegetation must establish within two weeks or be reseeded or replaced by nonvegetative control.

• Mapped floodplain development: Chapter 405 requires floodplain development approval in its mapped A/AE areas using the specified St. Louis County FIRMs dated February 4, 2015, as amended/revised. Public Works is Floodplain Administrator. Adopted floodway encroachments require the prescribed no-rise demonstration; before floodway designation, the stated cumulative development cannot increase base-flood surface more than one foot. Applicable structures require adequate anchorage and flood-resistant materials/construction, with utilities and wastewater protected. Yard-fence permission does not waive those mapped-property requirements.

• Survey markers: Missouri Section 60.355 protects the listed public-land-survey corners, boundary markers, benchmarks and horizontal-control monuments from knowing removal, movement, defacement or destruction, with an exception for a registered land surveyor. The statute provides a class B misdemeanor classification, restoration-cost liability and the affected owner’s stated surveying-cost and attorney-fee remedy. A fence permit does not authorize moving a protected marker.

• Excavation notice: Fence-post excavation, including covered hand digging, augering or driving, is subject to Missouri’s underground-facility law. Section 319.026 requires notice to the notification center at least 2 working days, but not more than 10 working days, before the expected start. The statutory period begins at midnight following receipt; Saturdays, Sundays and legal holidays are not working days. Notice identifies the excavator, responsible person, location, expected start, depth and type of excavation, and the other required site/contact information. The notice service is Missouri 811. Utility locating does not establish property boundaries or grant permission to enter another property.

• Responses and an unanswered notice: Under Section 319.030, participating operators ordinarily respond within two working days unless an extension is agreed. Early excavation requires the law’s confirmation that all facilities have been located. If an operator has not responded after a proper original notice, the excavator must give the prescribed second notice before beginning. The operator then has two hours to mark or contact the excavator; a second notice received by 2 p.m. requires marking that working day, and a later notice requires marking by 10 a.m. the next working day. Only the statute’s failure-to-mark-or-contact conditions allow excavation after that process. An unanswered first notice is not immediate permission to dig, and careful work remains required.

• Ticket life and markings: The notice has an operational life ending at 11:59 p.m. 21 consecutive calendar days from the start date of work. Work may continue within the described area while the notice remains valid and markings remain visible. If work cannot begin within ten working days as described in the request, a relocate request is required before starting. Unusable marks require a remark request with the original notice timing. Excavators must reasonably preserve markings; unnecessary repeat marking caused by a failure of care can create cost liability.

• Care near facilities: The statutory approximate-location strip is ordinarily no wider than the facility width plus two feet on each side. When reinforced concrete, multiple adjacent facilities or other specified unusual conditions interfere with locating, the operator designates a wider approximate area to the best of its ability. Before excavation, the excavator determines best practices for confirming horizontal and vertical location in the actual site conditions; hand or soft digging is used when possible. An incorrectly located or unmarked facility must be reported through the notification center, and the operator must respond within two hours by contact or correct locating. The limited exclusions for specified tillage or temporary markers are not a general exemption for structural fence-post holes.

• Damage and emergency work: Damage, dislocation or disturbance of a facility or its protective items, including trace wires, encasements and protective stakes, must be reported to the notification center. Pipeline contact or damage causing a hazardous-liquid or gas release requires an immediate 911 call. The excavator must not conceal damage or attempt repairs without the facility owner’s authorization. Emergency temporary sewer repairs after notification are narrowly allowed to prevent further damage; they do not remove the reporting duty. A genuine excavation emergency permits necessary work with all reasonable precautions to protect facilities and notice as soon as practical. Within two hours of receiving the emergency notice, the operator must mark or contact the excavator with available information and, if unable to mark within that time, state when marking will occur. Separate Missouri Department of Transportation permission applies to excavation in a state highway or its right-of-way under Section 319.025, subject to its railroad-right-of-way exception.

• Livestock and division fences: Missouri’s partition-fence systems address their own livestock and adjoining-owner conditions; they do not require every residential neighbor to pay half of a decorative fence. The applicable general or local-option system determines contribution, notices, viewers, repairs and removal. County class alone does not identify that system. Under the general system, repair-entry rights concern repair of the assigned division-fence part; general removal requires all owners’ consent except the public-road opening exception. Separate statutory notice/damages provisions can apply to removal beside cultivated fields. Public permits do not decide those obligations.

FENCE HEIGHT AND VISIBILITY RULES

• Height and front opacity: The six-foot ordinary required-yard allowance is distinct from the County seven-foot building-permit exemption and the qualifying eight-foot NU deer-fence branch. The ordinary front-yard opacity limit is 60% solid area in any ten-linear-foot segment. Do not import a sport-court containment height or an underlying building-height limit as a general yard-fence maximum.

• Corner visibility: The sight-distance triangle is bounded by intersecting property lines and a line connecting points 30 feet from their intersection. The ordinary fence exception keeps fences outside it entirely. Corner structures or plant material over three feet above the street pavement elevation are also excluded by the district’s visibility rule. Thirty feet is not measured from the curb or street centerline.

• Outdoor game courts: Ordinance 3068, July 13, 2026 requires the prescribed Planning and Zoning Commission review for outdoor game courts in NU and the listed R districts. Manufacturer-specified netting/fencing/boards must contain projectiles, stay outside structure setbacks, be no higher than ten feet and minimize visibility by color. Front-yard courts are prohibited. Landscaping is required; a hardship landscaping substitute for containment is discretionary. Plans show location/orientation and other required site conditions; use is for owners and guests, not organized teams/clubs or commercial activity. NU court lighting generally has a 16-foot pole maximum unless supported by the required lighting study.

• Pickleball court conditions: Permanent, temporary or multiple-use pickleball is limited to lots of at least one acre, with the court surface’s outside edge at least 150 feet from every abutting property line. The court must be below the elevation of abutting residential structures; the Commission may impose noise attenuation. Activity at an approved outdoor pickleball court ends by 9 p.m. These conditions attach to the court use, not every backyard fence.

MATERIAL AND CONSTRUCTION LIMITS

• Wood: The ordinary NU/R boundary-fence allowance permits treated or simulated wood, including vinyl-covered and synthetic wood composite, alone or with the other listed materials. Town Center architectural requirements and an approved development plan can further control appearance and location.

• Vinyl/PVC: The ordinary district rule expressly permits vinyl and vinyl-covered materials. Town Center street-front fencing may use compatible vinyl, but substitute vinyl in walls/fences must be from the Manual’s Master List. Approval of a product’s material does not waive front opacity, visibility or pool-opening limits.

• Chain-link and masonry: Ordinary NU/R chain-link must be coated with vinyl or a similar material. Stone, brick and listed metals—including steel, aluminum, wrought iron and metal composite—are also allowed under that exception. In contrast, the Town Center architectural guidelines prohibit chain-link; apply the actual district/design plan rather than extending the ordinary coated-chain-link allowance into that design setting.

• Electric and barbed fencing: Where the incorporated International Building Code (IBC) governs the fence, Section 3112.1 prohibits electrically charged fences and barbed wire, razor ribbon and similar material in new installations, with stated special-use exceptions. Its agricultural exception permits barbed wire for livestock containment, including crop areas used for grazing/feeding; it does not authorize electric fencing or ordinary residential razor wire. Separate industrial and correctional-institution exceptions have their own seven-foot placement conditions and do not grant a normal home-fence exception. Qualifying homes and their accessory structures are routed to the Residential Code (IRC); Wildwood Planning and St. Louis County Permit Processing must resolve whether the substantive Section 3112 restrictions govern the proposed IRC accessory fence. Independently, imported Section 105.2 excludes electrified, barbed-wire, razor-ribbon and similar fences from the ordinary building-permit exemption at any height. That permit requirement is not permission to use the material.

• Driveway barriers: Where incorporated IBC Section 3112.2 governs, a barrier less than three inches in vertical depth across a driveway or parking lot is treated as hazardous unless it meets the stated exception: permanent 1-inch horizontal by 12-inch vertical reflectors at no more than 36-inch centers, or a No Trespassing sign in the middle of the entrance outside public right-of-way. County Public Works requirements still apply under that section. For a barrier accessory to an IRC-covered home, use the same City/County route to establish this section’s applicability. The code distinction does not authorize blocking a public way or a private access easement.

• Town Center frontage and wall designs: Apply the actual Town Center area and approved development plan. Neighborhood General frontage voids use masonry garden walls with caps or pickets within 24 inches of the frontage line, 32–42 inches high; Downtown Workplace has its stated garden-wall frontage treatment. The architectural guidelines limit front pickets to 3½ feet and board fences to six feet in side yards behind the building front face and rear yards. Street-front fences use compatible wood, vinyl or coated metal; wood may have brick piers and gates are wood or wrought iron. Garden walls are at least eight inches thick, with cap overhang of at least one inch; caps are limestone or reviewed metal. Walls use no more than three materials. Other Town Center designations, including Neighborhood Edge and Pond, and approved plans retain their own treatment.

• Residential pool barrier height: Through its City adoption, County 1118.103 amends 2015 ISPSC 305.2.1: the general 72-inch rule has a 48-inch minimum for residential swimming pools measured above grade on the outside, away-facing side, around the entire perimeter and for a three-foot horizontal outside zone. Bottom gaps are at most two inches over nonsolid ground or four over solid surfaces; a top-mounted barrier has at most four inches between its bottom and pool top. County 305.2.10’s general 60-inch water clearance has a 20-inch residential-pool exception. A yard fence must independently satisfy these pool criteria to serve as the enclosure.

• Pool openings and climb prevention: The retained 2015 model requires openings that cannot pass a four-inch sphere and no climbable solid-face handholds/footholds except normal tolerances and masonry joints. If horizontal-member tops are less than 45 inches apart, they go on the pool side and vertical gaps/cutouts are at most 1¾ inches; at 45 inches or more, vertical gaps may be four inches but cutouts stay 1¾ inches. Chain-link openings must be at most 1¾ inches, including any slat-reduced openings with slats secured top and bottom. Diagonal openings are at most 1¾ inches and diagonals no more than 45 degrees from vertical. Keep a 36-inch outside zone clear of permanent climbable equipment/structures.

• Mesh pool barriers: Mesh follows manufacturer instructions and 305.2.4: bottom within one inch of the deck/grade, no lifting the bottom more than four inches or passing a four-inch sphere beneath a panel, and no more than four-inch bottom-to-solid-surface clearance. Attach sections at least 45 inches above grade; hinged gates meet 305.3, deck sleeves are nonconductive, and mesh is not installed atop an onground residential pool. These are mesh-specific requirements, not a waiver of the other barrier duties.

• Pool gates and latches: Gates must accommodate a lock. Pedestrian gates open outward away from the water, self-close and self-latch; utility/service gates remain locked when unused. Double/multiple gates require a fixed leaf and adjacent self-latching leaf, with no opening over ½ inch within 18 inches of the release. When a release is less than 54 inches from grade, place it on the pool side at least three inches below the top and limit nearby openings to ½ inch within 18 inches. That half-inch limit attaches to these specified gate/latch branches, not every opening everywhere in an otherwise compliant fence.

• Walls, pool structures and access: A dwelling/structure wall with direct-access doors or operable windows having sills below 48 inches above the indoor floor needs the specified UL2017 alarm protection, listed/labeled ASTM F1346 cover or approved equivalent protection. Alarm deactivation normally is at least 54 inches above floor, or 48–54 inches in accessible/Type A/Type B units. County 305.5 permits a manufacturer-approved pool-wall barrier with its bottom on grade and top at least 48 inches above grade around the whole perimeter, or a compliant top barrier with the same full-perimeter height. Wall/top-barrier construction must comply with 305.2 and top barriers follow manufacturer instructions. Access ladders/steps must be surrounded by a compliant barrier; the County amendment does not retain the model’s remove-or-lock-the-ladder-only alternative.

• Pool-cover and natural-boundary exceptions: Under 305.1, compliant lockable ASTM F1346 spa/hot-tub covers and compliant powered swimming-pool covers have the stated barrier exception. The shoreline exception requires no public access along the shore and barriers extending at least 18 inches beyond the water’s edge. A natural-topography alternative needs governing-body approval and equivalent protection. These are specific pool-code exceptions, not permission to omit ordinary zoning approval or leave an ordinary backyard pool unprotected.

• State onsite scope: Missouri’s onsite sewage rules include single-family lagoons. Section 701.031 excludes a qualifying single-family residential lot of at least three acres, or a residential lot of at least ten acres with no single-family residential sewage system within 360 feet of another onsite system and no more than one single-family residence per ten acres in the aggregate. The exclusions do not cover the specified lots adjacent to Corps of Engineers or public-utility lakes. Every system point must be more than ten feet from adjoining lines, with no effluent trespass, surface/groundwater contamination or scientifically determined nuisance. Section 701.047 preserves more restrictive local standards.

• Residential lagoon fences: Where 19 CSR 20-3.060(6)(D)15 applies, the pond fence must be complete before dwelling occupancy and at least four feet high. Welded, woven or chain-link material must use 14-gauge-or-heavier wire; cattle/hog panels may substitute with tee-post line posts. Posts must be pressure-treated wood or galvanized/painted steel, driven, tamped or concrete-set; line spacing cannot exceed ten feet and corner posts must be properly braced. Sound construction must leave no bottom gaps.

• Lagoon geometry and gates: The fence location is no closer to the operating water edge than the berm center, measured with the water at the three-foot operating level. Three feet describes operating water depth, not a horizontal fence-to-water setback. The gate must be properly hinged, four feet high, of comparable materials and effectively latched. The rule recommends, rather than mandates, line-post depth of 18 inches, corner-post depth of 24 inches, a setback no greater than 30 feet from the water edge and gate width of 36–48 inches. These recommendations use “should,” while the fence, spacing, bracing, gate and occupancy requirements use mandatory language.

• Livestock on residential acreage: Section 270.010 makes it unlawful for an owner to permit horses, mules, asses, cattle, swine, sheep or goats to run at large outside the owner’s enclosure. Such animals may be restrained, and the sheriff or other police officer must restrain them on the officer’s own view or notice from another person. Within three days, the person restraining them must give the known owner written notice stating claimed feeding/keeping compensation and damages. The owner owes reasonable taking-up, keeping and feeding compensation and actual damages caused. For an accident on a public road or highway, the owner has the statutory defense upon establishing the animal escaped through no fault or negligence of the owner. If the owner is unknown or, after notice, fails to compensate for taking up, feeding and keeping the animals, the stray-law route applies. These duties are separate from partition-fence cost allocation.

• Licensed family childcare homes: For an actual licensed family childcare home, 5 CSR 25-400.085 requires an outdoor play area on or adjoining the home’s premises, accessible without hazards, and hazard protection and play fencing where necessary against traffic, water or other hazards. For the rule’s initially-licensed-after-effective-date or newly installed-fence cohort, the play fence is at least 42 inches high and prevents crawling/falling through and entrapment. Pool/wading-pool enclosures prevent child access; the specified initial-licensing cohort requires 42 inches and a locked gate. An aboveground pool may use the stated top fence with barricaded steps; hazardous animals must be securely penned beyond child access. These duties do not themselves authorize the business or animal use under Wildwood zoning.

• State-park boundaries: For a boundary beside a state park or historic site, 10 CSR 90-2.070 provides participation to prevent livestock or commercial-game intrusion. A written Fencing Request Form and director/designee approval precede participation. Division inspection considers need, resource impacts, materials, cost and boundary location; a required boundary survey’s cost is shared equally. Written approval or denial is due within sixty days after receipt of the form.

• Park participation costs and construction: On approval, the division provides all fence construction materials as its statutory cost share, while the owner constructs and the owner and successors maintain. Construction must protect park resources and cannot alter elevations to drain wetlands or impound water on department land. The fence lies on the identifiable/verified boundary unless a written variance is approved.

• Park-boundary maintenance and removal: Maintenance on park land is limited to the rule’s brush/vine/regrowth work no more than three feet inside the boundary. Vehicles and equipment require facility-manager permission, as do herbicides affecting park vegetation. Overhanging branches may be trimmed at the boundary up to eight feet above ground. Removal requires written division consent except temporary repair removal. The division does not participate in fencing lands upon which poisonous crops are planted. The division also does not participate in costs where another law or judgment already requires the owner to fence.

• Abandoned family/private burial grounds: Section 214.131 protects qualifying cemetery fences and railings from knowing injury, mutilation, removal and the other stated damage, a class A misdemeanor. Its defined site has not been deeded to the public and has had no interment for at least twenty-five years. Section 214.132 separately grants reasonable ingress and egress for usual cemetery visits during reasonable hours when the qualifying site is wholly surrounded by private land without public access, with sheriff/chief county law-officer enforcement and preserved court disinterment/removal authority.

• Yard-based home work: Section 415.380(W) permits qualifying home-based work subject to its conditions. When that work occurs in the yard, the entirety of the yard in which the work is performed must be screened from an adjoining street by a structure or fence. The work cannot alter the residence’s appearance or create the prohibited traffic, visibility, storage, parking or utility impacts. Screening does not itself authorize a business that fails the other conditions.

• Boats, trailers and recreational vehicles: In residence districts, Section 415.380(S) requires boats, trailers and recreational vehicles behind the established front building line or completely screened from any roadway, right-of-way or adjoining property. The stated short-stay exception is less than 24 consecutive hours no more than four times a month; parking two hours or less within 24 hours does not count as prohibited parking. A screening fence still needs its own placement, material and approval compliance.

PRIVATE RESTRICTIONS

Recorded subdivision restrictions, homeowners-association architectural rules, easements, and enforceable fence ownership, cost or maintenance agreements can add requirements. The district fence rule expressly preserves stricter private enforcement. City or County approval does not establish a boundary, convey ownership, waive an easement or require a neighbor to fund every decorative fence. The applicable document and Missouri law govern the private question.

REVIEW AND ENFORCEMENT CONTEXT

Fence issues are typically reviewed during permit or approval review when required, and through complaint-based code enforcement. Examples include:

• City and County approval: Zoning authorization, the six/seven-foot building-permit issue, pool enclosures and separately required grading, historic or architectural approval.

• Placement and visibility: Required-yard conditions, pavement clearance, property-line sight triangles, approved plans, easements and protected trees.

• Construction and special uses: Materials, front opacity, pool openings/gates/access, game-court containment and conditionally applicable rural or licensed-home enclosures.

• Separate private matters: Subdivision covenants, title, ownership, access and contribution disputes remain separate from municipal approval.

USING THIS INFORMATION

This page provides general orientation on how residential fence rules are structured and applied within Wildwood, Missouri. Updated November 2026.

In addition to local fence rules, certain Missouri laws apply statewide. See Statewide Fence Laws in Missouri.

It is not legal advice and does not replace official statutes, ordinances, orders, permits, certificates, development approvals, applicable building-code requirements, surveys, recorded documents or professional guidance. Rules and interpretations may change, and application may vary with the identified municipality, including its actual municipal or county class, charter, adopted program or special district, and each function’s verified territory, the authority responsible for each issue, current code requirements and amendments, zoning and site conditions, subdivision or plat conditions, easements, rights-of-way, drainage and floodplain requirements, historic or design districts, pool use, agricultural or livestock conditions, fence ownership and shared-fence duties, excavation requirements, and private restrictions subject to Missouri law. Applicable requirements depend on the property’s actual facts and the respective authority of the identified offices. Private agreements and recorded rights remain separate from government approvals. If this page conflicts with controlling law, adopted regulations or official requirements, the controlling authorities govern.