FENCE RULES – BALLWIN (CITY), MISSOURI

OVERVIEW

This page covers residential fences inside the incorporated City of Ballwin, Missouri, in St. Louis County. A Ballwin mailing address alone does not place a property within the city limits.

Ballwin requires a City permit before a fence is erected or altered. Solid fences generally may be six feet high; qualifying open wood or metal fences may reach eight feet. Ordinary front-yard fences are prohibited, while corner and double-frontage lots have a specific street-side approval route. Pool enclosures must satisfy the City’s independent fence and gate rules alongside its current construction and property-maintenance requirements. Wood, vinyl, chain link and aluminum appear on the City’s fence application, but flexible materials are prohibited. Approved development plans, visibility, drainage, easements and particular animal or licensed-home uses can change the design. Updated November 2026.

Quick question Ballwin answer
Permit or approval A City fence permit is required before erection or alteration. The residential-code exemption for fences no higher than seven feet does not waive this separate approval.
Typical fence height Six feet for solid fences. Wood or metal fences may reach eight feet when regular or lattice openings comprise at least 50% of actual surface area. Intersection and pool rules differ.
Placement & property lines Ordinary dwelling front fences are prohibited. Corner and double-frontage street sides have a three-foot right-of-way or inner-sidewalk-edge offset and special conditions. Generic accessory-building setbacks exclude fences, but easements, drainage and approved plans remain.
Common fence materials Wood: listed on the City form, with height/openness conditions. Vinyl/PVC: vinyl is listed; PVC is not separately named. Chain-link: listed, with separate pool and special-screening limits. Flexible fence materials are prohibited.
Important local conditions Fence rules may be further affected by corner or double frontage, pools, approved development plans, visibility, floodplain and drainage conditions, public rights-of-way, easements, animal enclosures, licensed childcare and private restrictions.
Official local resource Ballwin building permits and inspection information

The table summarizes ordinary fence rules. The sections below explain their conditions, exceptions and the additional requirements for particular properties and uses.

GOVERNANCE

Ballwin is a fourth-class city. Its Board of Aldermen adopts municipal zoning and construction requirements, and the Building Commissioner administers the City’s fence and construction provisions. In September 2026, the City adopted the 2024 International Building, Residential, Property Maintenance, Fuel Gas, Plumbing and Mechanical Codes and the 2023 National Electrical Code, with local amendments. The separate municipal fence and swimming-pool ordinances continue to apply.

The City Engineer administers the applicable engineering, drainage and public-way requirements. Floodplain, health, zoning-plan and Board of Adjustment functions follow their respective City provisions. The City’s limited incorporation of County elevator, amusement, explosives and licensing rules does not transfer St. Louis County’s general fence or pool amendments to Ballwin. Government approval is separate from ownership, recorded easements and private restrictions.

PERMIT AND APPROVAL REQUIREMENTS

• Fence permit, plans and fee: Sections 7-222 and 7-223 require an application and permit before erecting or altering a fence, screen, wall or other exterior partition. The application identifies type, material and location. The City’s fence application requests two plot-plan copies and height/material information and states a $45 permit/inspection fee. The amount assessed when filing controls. Applications are handled through the City’s MyGov permit system. General plan and inspection requirements and the more detailed street-side conditions below remain applicable; fences are excluded from the separate two-percent construction-cost deposit provision.

• Construction exemption and low partitions: The adopted residential code exempts fences not over seven feet from its building-permit requirement while preserving other laws. Ballwin’s separate fence permit still applies. The local definitions include a barrier over two feet above existing grade and a broader fence/screen partition definition; the permit provision also names walls and exterior partitions. A low wall or screen therefore does not have an automatic exemption merely because it is two feet high or lower.

• Alterations, replacements and older fences: Replacing a fence by erecting or altering it remains within the City permit rule. Section 7-226 does not provide a general residential grandfather right. Its limited continuation provision concerns fences erected before November 1, 1989 in the named commercial districts. Removal or damage exceeding 60% of assessed value ends that continuation unless the Board of Adjustment makes the specified compelling-necessity determination. The ordinance’s old one-year conformity and thirty-day electrical-shutoff periods are implementation provisions, with their stated annexation/amendment starting dates, rather than a new grace period for present work.

• Corner and double-frontage applications: The special street-side plan shows location, height, landscaping on the right-of-way side, fence design and approximate grade on both sides. The owner agrees to maintenance, annual City inspection and required repairs; noncompliance can lead to permit revocation. A maintenance-access gate is required. Placement in the public right-of-way needs the Board of Aldermen’s special approval and conditions. These approvals accompany the placement and appearance rules below.

• Retaining walls: The residential construction-permit exemption covers a wall not over four feet from the bottom of the footing to the top of the wall, unless it supports a surcharge. Engineering under IRC R404.4 is required for a wall without top support retaining more than 48 inches of unbalanced fill, or a wall over 24 inches that resists additional lateral loads beyond soil. Design addresses overturning, sliding, excessive foundation pressure and water uplift, with a 1.5 safety factor against lateral sliding and overturning. Separate City wall/fence, grading and drainage approvals remain applicable.

• Family-pool permits: Chapter 26 defines a family pool by its use for a single-family owner or lessee, family and private guests. Its general pool definition reaches water at least 24 inches deep or a surface area over 250 square feet. Construction, alteration, improvement, remodeling, removal or demolition requires the City pool permit. Four plan sets provide site, equipment and profile information; inground plans require the specified registered architect or engineer seal. Health approval, approved plans, trade inspections and the required use certificate govern the respective work and use stages. The residential-code exemption for a prefabricated pool less than twenty-four inches deep does not cancel independent City requirements.

• Planned properties and design conditions: R-4, R-5, planned single-family and planned-overlay properties can have approved development/site plans governing fence locations, screening, open space and drainage. Underlying requirements continue unless the governing ordinance grants a specific waiver or substitute; more restrictive applicable conditions remain. Material changes follow the plan-amendment process, while only qualifying minor changes may receive administrative approval. Ballwin’s historic-register and preservation provisions do not create a general historic certificate-of-appropriateness process for ordinary home fences.

• Land disturbance: A City permit is required for disturbance of 10,000 square feet or more, and for smaller work the City Engineer determines creates an erosion, flooding or sedimentation hazard. Immediate emergency work protecting life, property or natural resources and qualifying previously permitted nursery/agricultural operations have their stated exceptions. A site-specific stormwater pollution prevention plan is prepared by or under a registered engineer or landscape architect. Missouri Department of Natural Resources approval applies at one acre or more, including smaller portions of a larger common plan. Required road, sewer-district and other agency approvals precede the City permit.

• Floodplain development: Work in mapped A or AE flood-hazard areas requires the applicable floodplain-development permit and site/elevation information. Development includes fill, grading and excavation, not just a new building. The adopted map reference is February 4, 2015, as revised. Floodway encroachments require engineering showing no increase in flood levels; applicable protection, anchoring, flood-resistant material and drainage conditions remain. A variance is subject to its particular findings and conditions.

• Public-place excavation: Separate City permits govern the specified excavations in public places, rights-of-way and easements. Excavations in or adjoining a public way require Engineer-directed barriers and lights. Utility disturbance requires the Engineer’s and utility owner’s consent, and private-land entry requires the owner’s permission. Tree removal and restoration follow their own consent requirements. The specific City-work exception does not eliminate the independent Missouri excavation-notice duties.

• Appeals and variations: The Board of Adjustment hears the covered zoning decisions of the Building Commissioner or City Engineer. Notice and grounds must be filed with the official and Board within the reasonable period fixed by Board rules; the ordinance does not set a universal thirty-day administrative deadline. The code states a $500 filing fee. A variation requires unusual practical difficulty or hardship, rather than mere convenience, and protection of neighboring property and public welfare. Four concurring votes and written findings are required. Judicial review is within thirty days after the Board decision is filed in its office. Construction-code appeals follow their separate local provisions.

FENCE PLACEMENT RULES

• Front yards: For ordinary dwellings, a fence is prohibited between the City right-of-way line and the front building line. Double-frontage lots have a required front yard on both streets. The specific corner/double-frontage street-side allowance below does not remove the main dwelling-front restriction. The named C-1, C-2, C-3, public-activity, mixed-use and S-1 districts have separate treatment; their front-fence provisions are not permission for every residential lot.

• Corner and double-frontage street sides: In dwelling districts, a fence along the side street of a corner lot or on a double-frontage lot must be at least three feet from the City right-of-way line where there is no sidewalk, or three feet from the sidewalk edge nearest the building line where a sidewalk exists. The associated application clause speaks of locations greater than three feet. The City determines an exact-line proposal under these provisions; precisely three feet is not a no-permit allowance. The fence must also satisfy visibility and the special plans, maintenance and appearance conditions.

• Side and rear boundaries: Fences and retaining walls are excluded from the generic accessory-structure setback schedule, including its five-foot accessory-building offset. Frontage, sight lines, drainage, easements, approved plans and ownership still determine whether a particular side or rear location is lawful. A building-permit plat or staking requirement does not make an old fence or tax map the surveyed boundary.

• Public rights-of-way and invisible fences: The public right-of-way may extend beyond the pavement. Aboveground fence placement there requires the special Board approval described above. The City’s permission for subsurface invisible fences and lawn sprinklers in the specified unpaved area places them at the property owner’s risk and disclaims City damage liability. It does not authorize an aboveground fence or obstruction of sidewalks, streets or access. Drain pipes may not daylight into the right-of-way under the local rule.

• Watercourse easements: The subdivision drainage provisions require watercourse easements for access and maintenance substantially following the channel. A structure may not be closer than twenty feet to the easement of a creek, stream or other major watercourse. Within that approved-site framework, the City’s structure definition includes fences. The measurement is from the easement, not automatically twenty feet from the water’s edge. Approved drainage, retaining-wall and berm conditions also remain.

• Drainage and stormwater: Fence posts, walls and grading must preserve required drainage, swales and easements. City stormwater review uses the adopted Metropolitan St. Louis Sewer District standards and local engineering requirements, with the Board’s stated waiver process. The under-one-acre nonconforming single-family exception applies to Section 11-36’s retrofit obligation, not to every drainage or land-disturbance approval. The adopted property-maintenance code requires grading and drainage that prevent erosion and stagnant water, except for approved retention areas and reservoirs.

• Grading and erosion controls: Covered grading normally limits slopes to 3:1 unless the Engineer approves otherwise. Natural vegetation and resources are retained as required, and sediment controls precede disturbance. The applicable short stabilization schedules include five days for disturbed land and end-of-day cover or perimeter protection for stockpiles. If a defined watercourse is realigned or reconfigured, clearing and grubbing within fifty feet must wait until all materials and equipment needed to protect the watercourse and complete the work are onsite. Work must finish as soon as possible. Areas within fifty feet must be recontoured and revegetated, seeded or otherwise protected within five working days after grading ceases. That construction-timing provision is not a general fifty-foot fence setback.

• Public trees and planting: City permission governs planting or removal of street and park trees, and ordinary topping is prohibited. The permitted owner pruning follows ANSI A300 and must not create hazards. Vegetation adjoining the right-of-way must preserve sight lines, drainage and access, including fourteen feet of clearance over streets and the City’s applicable sidewalk clearance. A correction notice allows ten days from mailing or posting to comply or appear before the administrator.

• Managed gardens and vegetation: Managed native or ornamental planting, crops and gardens above the ordinary six-inch vegetation limit must be at least four feet from property lines, free of the specified weeds/invasive growth and without sight or safety nuisance. Wooded and large lots have their stated vegetation-treatment exceptions. This four-foot condition concerns planting, not the setback of an ordinary fence.

• Boundaries and survey products: A fence’s age or location alone does not establish ownership. Missouri adverse possession requires actual, open and notorious, exclusive and continuous hostile possession under a claim of right for ten years. A prescribed surveyor’s real-property report is not a boundary survey: it sets no corners and is not intended for fence construction. Occupation lines such as a fence need the appropriate survey support.

• Survey markers: Section 60.355 prohibits a person other than a registered land surveyor from knowingly moving, removing, defacing or destroying the specified survey corners, boundary markers, benchmarks and control monuments. Its surveyor exception is not blanket permission to relocate a boundary. The statute separately provides restoration liability and the affected owner’s action for reasonable surveying costs and attorney fees.

• Neighbor trees and roots: Fence work also does not authorize injury to another person’s trees or roots; Missouri Sections 537.340 and 537.360 distinguish treble value and costs from the single-damages-and-costs limitation where there was probable cause to believe the property was the actor’s own.

• Qualifying cemeteries and burial grounds: If a property contains a qualifying abandoned family cemetery or private burial ground, Section 214.131 protects its fences and railings from knowing damage or removal. The defined site has not been deeded to the public and has had no interment for at least twenty-five years. When private land completely surrounds it without public access, Section 214.132 preserves reasonable ingress and egress for usual cemetery visits during reasonable hours. The sheriff or chief county law-enforcement officer enforces that access; the courts retain their disinterment/removal authority.

• Missouri excavation notice: Covered excavation includes hand tools, augers and driven posts on private property as well as public ways and utility easements. Except for statutory exceptions, notice through the notification center is given at least two and no more than ten working days before the expected start. The two-day calculation begins at midnight after receipt and excludes Saturdays, Sundays and declared State or federal holidays. The limited tillage and temporary-marking exclusions are not a general post-hole exemption. Privately owned lines are not guaranteed universal locating.

• Locate responses and a missed response: Operators ordinarily have two working days to mark or report no facilities, unless the prescribed extension is agreed. Early excavation requires confirmation that all facilities have been located. When a compliant notice receives no response, a second notice through the center is required before excavation. The operator then has two hours to mark or contact the excavator with its marking time. Notice by 2 p.m. requires marking that working day; later notice requires marking by 10 a.m. the next working day. Work after that process is allowed only under the statute’s failure-to-mark-or-contact conditions and continuing care requirements.

• Ticket life and careful excavation: A notice expires at 11:59 p.m., twenty-one consecutive calendar days from the work start date. Work may continue in the notified area while the notice and visible marks remain valid. Failure to start within ten working days, or unusable marks, requires the applicable relocate or remark request. Marks must be preserved, and site-specific safe methods must establish horizontal and vertical facility locations. Hand or soft digging must be used as a best practice when possible. The statutory approximate location generally includes the facility’s width plus two feet on each side, with an expansion for the specified unusual conditions.

• Unmarked facilities, damage and emergencies: An incorrectly located or unmarked facility must be reported through the center; the operator has two hours to contact the responsible excavator or correctly locate it. Excavation damage, dislocation or disturbance, including damage to trace wires or protective items, must be reported. A hazardous liquid or gas release from pipeline contact requires immediate 911 notice. Damage may not be concealed and repairs require owner authorization, except for the specified emergency temporary sewer repair after notification to prevent further damage. Genuine emergency excavation requires reasonable precautions and notice as soon as practical. Notified operators must mark or contact the excavator within two hours with available information and, if unable to mark within that time, state when marking will occur. State-highway or highway-right-of-way excavation separately requires the commission’s permit under Section 319.025(4), subject to its railroad-right-of-way exception.

• Division fences and shared costs: Missouri’s two partition-fence systems address their own livestock, land-use and shared-fence conditions. They do not require every Ballwin neighbor to pay half of an ordinary yard fence. The applicable statutory system, use and agreement determine contribution, repair-entry and removal rights; a City permit does not decide them.

FENCE HEIGHT AND VISIBILITY RULES

• Solid and open fences: The general maximum is eight feet, with a six-foot maximum for a solid fence or screen. A wood or metal fence may reach eight feet only when regular or lattice openings total at least 50% of its actual surface area. This is a whole-surface test, not an automatic allowance for six feet of solid panel topped with two feet of lattice. Pool, street-visibility and approved-plan conditions can be more restrictive.

• Intersections: No fence, wall, structure or planting over two and one-half feet above street grade may be erected or maintained within fifteen feet of the right-of-way lines of intersecting alleys, streets, roads or highways. The zoning ordinance also states the two-and-one-half-foot limit within fifteen feet of a street intersection. The reference is street grade, not the grade of a raised yard.

• R-5 and neighborhood-commercial properties: In the R-5 planned-infill district, structures including fences may not exceed eight feet within the required setback adjoining a non-R-5 district or public right-of-way. The general solid/open fence limits still apply. A separate ten-foot solid fence allowance applies only to a qualifying Neighborhood Commercial Overlay District parcel of at least four acres immediately adjoining a residential district, with the fence on the commercial-overlay parcel. It is not a height allowance for every adjoining homeowner.

• Family-pool enclosure height: Every outdoor family pool requires a fence at least four feet and no more than six feet high under Chapter 26. A dwelling or accessory-building wall may form part of the enclosure, subject to the additional access protections below. The residential construction rules also require the barrier top at least 48 inches above outside grade around the entire perimeter and for three feet horizontally outside. Both sets of requirements apply.

• Stormwater detention basins: Under the applicable subdivision drainage standards, a basin at least four feet deep from the low-water flow line to the overflow-structure flow line requires an enclosure when its side-wall slope is greater than 3:1. The enclosure is at least four feet high measured outside, located at or above overflow elevation, and has a lockable maintenance-equipment gate. Openings cannot pass a six-inch sphere, and the design must fit the neighborhood. Basins not requiring enclosure have slopes no steeper than 6:1. These are the combined depth/slope conditions of the basin rule.

MATERIAL AND CONSTRUCTION LIMITS

• Wood: Wood is listed on the City’s fence form and is expressly covered by the open-fence height provision. A solid wood fence is ordinarily limited to six feet; the eight-foot option requires fifty-percent openings across its actual surface. Street-side appearance, pool construction and any required screening also apply.

• Vinyl/PVC: Vinyl is listed on the City form. PVC is not separately named. A solid vinyl fence remains subject to the six-foot limit; the eight-foot open-fence provision expressly names wood or metal rather than every material. A permitted special pet facility has its own solid-vinyl enclosure rule described below.

• Chain-link and aluminum: Chain link and aluminum are listed on the City form. Metal fences using the eight-foot allowance must meet the actual fifty-percent-opening test. Pool chain link has its own smaller-opening and secured-slat requirements. The C-1 shallow-lot screening alternative below excludes modified chain link even though ordinary yard fencing can use that material.

• Flexible, barbed and electric materials: Section 7-224 prohibits cloth, canvas and other flexible fence material. It also prohibits barbed wire or other single wire, except the specified utility/government top-of-fence use at least six feet above grade. The electrical-current restriction has an express exception for properly insulated wire installed in accordance with the electrical code; it does not establish general permission for an exposed energized yard fence. A model pool-code mesh or screen option must also satisfy the City’s local material rules.

• Street-side appearance: The corner/double-frontage approval requires the finished side to face the roadway. Where adjoining existing fences expose their unfinished side, the City may approve matching that orientation. Color, style, height, material, orientation and location must blend with nearby front fences. These are the street-side conditions; they are not a separate universal finished-face rule for all rear fences.

• Condition and repair: Fences, screens and walls must remain in good condition and repair, including paint or stain. Accessory fences must remain functional and safe, without obstructing necessary light, air or access or creating fire/vermin hazards. The adopted property-maintenance code also requires structural soundness and good repair. Unsafe fences can be subject to the City’s repair or removal process. Exterior wood fence surfaces other than decay-resistant wood require paint or another protective covering or treatment. Peeling, flaking and chipped paint must be removed and the surfaces repainted. Metal surfaces subject to rust or corrosion must be coated; existing rust or corrosion must be stabilized and coated to prevent recurrence. Oxidation stains must be removed, except on surfaces designed for stabilization by oxidation.

• Pool construction sites: Through the adopted 2024 residential-code reference, the 2024 International Swimming Pool and Spa Code governs covered pool/spa design and construction. Inground pool or spa construction sites require a fence at least four feet high from excavation until the permanent barrier is completed. This construction-stage fence is separate from the permanent family-pool enclosure.

• Pool openings and climbability: Chapter 26 limits ordinary enclosure openings, holes, gaps and picket spacing to four inches, with its local door/gate exception. The applicable model barrier rules additionally prohibit openings passing a four-inch sphere. Outside bottom clearance is at most two inches over nonsolid ground or four inches over a solid surface; a barrier mounted on a pool has at most four inches between the pool top and barrier bottom. Solid barriers cannot provide handholds or footholds beyond normal construction tolerances or tooled joints. The Commissioner reviews materials and construction under the City’s other ordinances as well.

• Pool rails, chain link and diagonals: When horizontal-member tops are less than 45 inches apart, the rails face the pool and vertical spaces and decorative cutouts are at most 1¾ inches. At least forty-five inches between rail tops allows four-inch vertical spacing, but decorative cutouts remain limited to 1¾ inches. Chain-link openings are at most 1¾ inches; reducing slats must be secured at their top and bottom. Diagonal openings are at most 1¾ inches, with diagonal members no more than 45 degrees from vertical.

• Proposed mesh or screen pool designs: Because Ballwin prohibits flexible fence materials, meeting a model mesh or screen specification alone does not authorize that design. The City’s material and pool review must establish a compliant approved design. Where applicable within such a design, mesh fencing other than chain link follows the manufacturer’s instructions and ASTM F2286, uses compliant hinged gates, and cannot be installed atop an onground residential pool. Its inside face is at least twenty inches from the nearest water edge. This twenty-inch rule is specific to mesh fencing in the 2024 edition.

• Screen enclosures and outside equipment: An approved compliant screen enclosure forming a pool barrier must satisfy the barrier rules and be designed by a registered design professional. Its walls are not treated as dwelling walls. The model screen-mesh requirements are at least 100 pounds per square foot tensile strength under ASTM D5034 and 150 pounds per square foot ball-burst strength under ASTM D3787, alongside Ballwin’s material restrictions. Pumps, filters, heaters and other equipment outside a barrier on the same lot must remain at least 36 inches from its outside face.

• Pool gates: Barrier doors and gates must accommodate a lock. Pedestrian access opens outward, away from the pool, and self-closes and self-latches; a door or gate may not swing over stairs. Unused utility/service entrances remain locked. For double or multiple gates, at least one leaf is secured and the adjacent leaf self-latches. Ballwin independently requires self-closing and self-latching devices at the top, secure closure when not in use, and a padlock or other locking device when the pool is unused or unattended.

• Residential pool latch locations: A non-self-locking release accessible from outside is at least 54 inches above the finished floor or ground. For self-locking hardware, a key, electronic opener or integral combination control and the release are no more than 54 inches above that surface. When the only release is on the pool side, it is at least three inches below the gate top. A release inside the barrier also requires openings within eighteen inches of it to be no more than one-half inch in any dimension. The City’s top-hardware requirement and ongoing pool-maintenance rule also govern the chosen gate.

• A house wall beside a pool: Where a house or structure wall forms part of the barrier and provides direct access, the alarm route protects doors, gates and operable windows with sills below 48 inches above the indoor finished floor. The alarm is listed and labeled as a water-hazard entrance alarm under UL 2017. Its deactivation controls are at least 54 inches above finished floor in ordinary dwellings; required Accessible, Type A or Type B dwellings and other structures use 48 to 54 inches. The City must resolve a proposed wall/cover or equivalent-protection alternative and its compliance with the separate local enclosure rule. Control height alone is not an alarm or a complete barrier system.

• Onground pool walls and access: A pool wall alone qualifies under the model option only when its bottom is on grade, its top is at least 48 inches above grade around the entire perimeter, it meets Section 305.2 and the manufacturer permits that use. With a barrier mounted on the wall, the combined top must be at least forty-eight inches around the entire perimeter, both wall and barrier must comply, and installation follows manufacturer instructions. Access ladders or steps must be secured, locked or removed to prevent entry unless surrounded by a compliant barrier; resulting openings cannot pass a four-inch sphere. These options still must satisfy Ballwin’s independent family-pool rule.

• The City’s elevated-deck option: For the local exception addressing an outdoor family pool with a deck four feet above ground, the deck railing has no opening more than four inches wide. A locking swing-up stairway is required, with hardware cloth or equivalent beneath the carriages or stringers to prevent entry between treads. A railing gate self-closes and self-latches at its top. The applicable construction and property-maintenance safeguards remain in force.

• Pool covers and natural barriers: The model recognizes a lockable ASTM F1346 safety cover for a spa or hot tub, or a powered ASTM F1346 pool cover, as alternatives to its Sections 305.2 through 305.7. A natural-water boundary alternative requires no public shoreline access and other barriers extending to and at least eighteen inches beyond the water edge. Natural topography substitutes only with governing-body approval and equivalent protection. None of these options automatically waives Ballwin’s separate family-pool enclosure, gate or construction-fence duties.

• Ongoing pool safeguards: The adopted property-maintenance code covers private pools, hot tubs and spas with water more than twenty-four inches deep. It requires a barrier at least 48 inches above outside finished ground, self-closing/self-latching doors and gates, and a pool-side release when its height is below 54 inches measured from the bottom of the gate. A gate must positively close and latch when released six inches from the gatepost. Existing barriers cannot be removed, replaced or changed to reduce their effectiveness. The specified lockable spa/hot-tub safety cover and complying powered pool cover working from its control switch are exceptions within that maintenance provision, not automatic waivers of Chapter 26.

• Glass near pools and wet surfaces: IRC R324.4.5 treats glass in walls, enclosures or fences containing or adjacent to pools, hot tubs, spas and the other named wet uses as hazardous glazing when its bottom exposed edge is less than sixty inches vertically above a standing or walking surface. This applies to each pane of multiple glazing. The exception is glass more than sixty inches horizontally from the water’s edge or the specified wet-enclosure edge. Applicable safety-glazing design requirements accompany, rather than replace, the fence rules.

• Pool drainage, wiring and unused pools: Family-pool drainage keeps runoff out of the pool and required walks slope away. Pool water is discharged by hose to the public storm sewer rather than onto neighboring property or through surface routes producing stagnant accumulation. Local rules prohibit current-carrying conductors over, under or within ten feet of a family pool and require grounding of nearby metal fences or railings subject to energization. Abandoned or unused family pools, and those at premises unoccupied for thirty days or more, must be drained or covered strongly enough to support an average adult. Other trade-code and enclosure duties remain.

• Ordinary animal enclosures: The listed livestock, fowl, rabbits and similar animals generally require an enclosed area on at least two acres, subject to the separate exceptions for dogs, cats, regulated nondomestic animals, traditional caged household pets and aquarium animals. For animals over fifty pounds, the local stocking clause uses “two per acre over a total of two acres”; the City determines a particular stocking proposal under that wording. Enclosures must prevent unlawful running at large and comply with sanitation and odor requirements.

• Dogs and dangerous-dog fences: Dogs cannot run off their premises without the required restraint, and females in heat must be securely confined in an enclosed place. A known fierce or dangerous dog, or one with the specified attack or propensity history, requires a fully fenced yard of sufficient height, strength and design to prevent jumping, crawling through or under, or inadvertent release. The ordinance sets no single numerical height for that fence. A conspicuous public warning uses letters at least two inches high with one of the prescribed bad-dog or beware-of-dog phrases.

• Nondomestic animals: A regulated nondomestic animal requires the City license, a confinement/location proposal, police inspection and any required State wildlife permit. Species-specific enclosure standards apply through that approval. An outdoor enclosure required to be at least eighty square feet under the incorporated standard must be at least one hundred feet from every property line; when two or more enclosures total eighty square feet or more, all have that offset. Other enclosures follow ordinary City setbacks. The animal’s required cage design is a separate licensing determination, not an ordinary yard-fence standard.

• Lawfully permitted captive cervids: A property permitted to keep captive cervids must meet the State enclosure rule as well as City animal, location and fence approvals. The fence and posts are at least eight feet high throughout. Material choices are woven or high-tensile woven wire no smaller than 12½ gauge, welded wire no smaller than 6 gauge, chain link no smaller than 9 gauge, or wood planks. Vertical wire/plank spacing is at most 6½ inches, and bottom clearance at most three inches. Stacked fences either overlap at least six inches with attachments no more than three feet apart, or are combined and attached no more than twelve inches apart. This is a captive-animal rule, not an eight-foot requirement for a garden fence excluding wild deer.

• Captive-cervid gates and clearing: Gates are locked, latched and at least as protective as the fence. The rule requires clearing woody vegetation under six inches diameter at breast height for at least six feet inside and six feet outside on land under the keeper’s control. Enclosures or additions built after June 30, 2019 have the separate requirement to clear all woody vegetation six feet inside and outside. Dead trees taller than their distance from the fence must be felled on controlled land. Water crossings, terrain and maintenance must prevent entry and escape, with supplementary measures where needed.

• Animal businesses and special facilities: A kennel may not occupy a residential building and has separate licensing and neighbor-assent conditions. An approved pet-daycare or boarding facility has its own outdoor-pen rule: at least three hundred feet from residential zoning or use and an eight-foot solid vinyl fence, subject to the Board’s stated modification or additional-condition authority. These requirements do not authorize that use at an ordinary home or apply that fence height to every pet owner.

• Licensed family childcare: For licensed family-childcare homes, the outdoor play area must be on or adjoining the premises and safely accessible. Fencing is required where needed against traffic, water or other hazards. Homes initially licensed after the rule’s effective date, and new fences at existing facilities, require a fence at least 42 inches high. Fences must be constructed to prevent children from crawling or falling through or becoming entrapped. Pools must be fenced against child access; the specified initial-license cohort requires a forty-two-inch fence and locked gate, with the stated aboveground-top-fence and barricaded-step alternative. Hazardous animals must be securely penned away from children. Stricter applicable City pool requirements remain.

• Childcare site and operating conditions: A home’s applicable approved-site and fence/play-area safety conditions remain relevant. The separate local school/daycare-center provision uses a twenty-five-foot planted buffer providing 75% screening to six feet; that is not a buffer required at every family-childcare home. Current Missouri home-business and home-work statutes limit local operating-permit, occupation and hours restrictions for qualifying homes. The City’s application of its older home-daycare operating provisions must account for those protections while retaining lawful health, safety and fence requirements.

• Compost and stored items: Residential compost must be in an appropriate container, without odors detectable on neighboring property or vermin. A regulated fence or wall around it still follows the fence rules. Required outdoor-storage screening must be permanent, sound and fully sight-proof; flexible tarps do not qualify. Inoperable vehicles have the separate locked-building or locked-fenced-area requirement together with invisibility. Screening does not legalize otherwise prohibited junk.

• Home businesses and equipment: A fence does not by itself authorize outdoor business storage. Missouri protects qualifying no-impact home businesses, including lawful activity in the yard that is not visible from the street, within its occupancy, traffic, parking and narrowly tailored health/safety conditions. Qualifying home work within a home or accessory structure has additional protection under Section 89.500. City restrictions must operate within those statutes. Separately, up to two pieces of equipment used to maintain the premises may be stored outside a fully enclosed building only behind the building line and hidden from adjoining right-of-way, with the stated rear-frontage condition on through lots. Private covenants remain separate.

• Fence signs and lighting: Section 7-221 prohibits fence advertising, and the temporary-sign rule prohibits attachment or display on fences. The decoration/art exemption excludes letters, numbers, trademarks, moving parts and lights and retains safety conditions; it does not displace a required dangerous-dog warning. Residential lighting must avoid glare and nuisance, use full-cutoff design and screening, and limit light trespass to 0.1 foot-candle at the property line, measured at ground level or its lowest elevation to avoid obstructions.

• Homes on C-1 property: Where C-1 district screening applies to a lawful residential or mixed-use property, the side yard adjoining a dwelling, dwelling district or public-activity district is at least twenty-five feet and landscaped/screened under the rear-yard standard. A required rear yard is generally twenty-five feet; when adjoining districts other than the specified commercial/industrial districts, it is landscaped with evergreen and deciduous trees/shrubs providing 100% screening to six feet above ground. The protected landscaped area remains free of the listed structures, pavement and new aboveground utility improvements.

• C-1 alternative screening and C-2 edges: For a C-1 lot less than 125 feet deep whose plat was recorded when the July 28, 2008 ordinance passed, the rear yard need not exceed 20% of lot depth. Compatible sight-proof fencing with a reasonable twenty-year life may replace the vegetation screen, but modified chain link is excluded. Supplemental planting provides one six-foot evergreen, one two-inch-caliper tree or one five-gallon shrub per twenty-five linear feet. This screening alternative also applies to the specified retained pre-April 10, 2000 buildings when the twenty-five-foot yard cannot fit. Rear yards abutting commercial/industrial districts use the specified six-foot fence or landscape alternative. A C-2 boundary adjoining residential lots has a separately approved three-to-eight-foot fence with trees/shrubs, or buffer and border planting. These are district-edge conditions, not a new perimeter duty for every home.

• Screens on planned mixed or multifamily sites: Required buffers, common areas and screens remain part of the approved site. In Manchester Road, Neighborhood Residential and Neighborhood Commercial overlay developments, the parking-screen alternatives include a twelve-foot landscaped perimeter or a five-foot-wide landscaped perimeter with ornamental metal fencing or a masonry wall and required planting. Five feet describes the landscape width, not a fence height. The relevant perimeter-buffer/planting-island trigger is parking lots with five or more spaces. For Neighborhood Residential multifamily sites, refuse, recycling, yard-waste storage and equipment screening must be architecturally compatible and at least 80% opaque to six feet above grade.

• Commercial interfaces and conservation areas: Where an approved Manchester Road or Neighborhood Commercial overlay site includes a drive-through adjoining residential zoning or use, its required solid fence or wall provides 100% screening to six feet with a landscaped area at least twenty-five feet wide. A neighboring homeowner’s fence does not remove that site obligation. Conservation-subdivision land, dedicated open space and recorded natural areas retain their preservation and maintenance restrictions; an ordinary fence approval does not authorize clearing them.

• Approved private sewage systems: The City requires sewer connection when public sewer is available within 150 feet of any part of the property. Otherwise, a private system requires Health Commissioner approval and applicable State standards, with written approval before installation or alteration. For a lawful approved treatment pond subject to Missouri’s pond-fence rule, fencing must be complete before dwelling occupancy. State acreage exclusions do not remove independently stricter City approval requirements.

• Treatment-pond fence construction: Where the State pond standard applies, the fence is at least four feet high, using welded, woven or chain-link wire no smaller than 14 gauge, or cattle/hog panels with tee-post line posts. Posts are pressure-treated wood or galvanized/painted steel, driven, tamped or set in concrete. Line-post spacing is at most ten feet, corners are braced and there are no bottom gaps. The fence is no closer to the water edge than the berm center, measured at the three-foot operating water level. A comparable four-foot gate is properly hinged and effectively latched. Line-post depth of eighteen inches, corner-post depth of twenty-four inches, placement no more than thirty feet from water and gate width of thirty-six to forty-eight inches are recommendations, not mandatory dimensions.

• Work hours and cleanup: Outdoor construction, alteration, erection, excavation and repair are prohibited from 8 p.m. to 7 a.m., except under the stated emergency route. After the first twelve hours, emergency night work requires the administrator’s permit, for no more than three days with possible renewal. Government/utility emergency and City-recreation maintenance exceptions remain. Wire, debris, dirt and other hazards must not be left on streets or adjoining land.

PRIVATE RESTRICTIONS

Recorded covenants, homeowners-association architectural requirements, private easements and enforceable boundary, maintenance or cost agreements may impose additional conditions. Their actual terms and Missouri law determine location, height, materials and approval obligations. A City permit does not waive those restrictions or decide fence ownership and cost allocation.

An access easement is governed by its grant and legally established scope. A fence or gate can substantially interfere with vehicles, equipment, maintenance, drainage or other protected use even when some passage remains. Providing a key does not automatically cure that interference.

REVIEW AND ENFORCEMENT CONTEXT

Fence issues are typically reviewed during permit or approval review when required, and through complaint-based code enforcement. Examples include:

• Permits and approved plans: Fence erection or alteration, street-side applications, retaining walls, pool construction, grading, floodplain work and changes to required site screens.

• Placement, height and materials: Front-street encroachment, corner visibility, excessive height or solidity, prohibited flexible or wire materials, public-way obstructions and interference with protected drainage or access.

• Enclosure safety and maintenance: Deficient pool gates or barriers, deteriorated fences, dangerous-dog confinement and the applicable licensed-home or approved special-use enclosures.

• Separate private matters: Covenant, ownership, boundary, easement and shared-cost disputes remain distinct from City code administration and permit approval.

USING THIS INFORMATION

This page provides general orientation on how residential fence rules are structured and applied within the City of Ballwin, Missouri. Updated November 2026.

In addition to local fence rules, certain Missouri laws apply statewide. See Statewide Fence Laws in Missouri.

It is not legal advice and does not replace official statutes, ordinances, orders, permits, certificates, development approvals, applicable building-code requirements, surveys, recorded documents or professional guidance. Rules and interpretations may change, and application may vary with the identified municipality, including its actual municipal or county class, charter, adopted program or special district, and each function’s verified territory, the authority responsible for each issue, current code requirements and amendments, zoning and site conditions, subdivision or plat conditions, easements, rights-of-way, drainage and floodplain requirements, historic or design districts, pool use, agricultural or livestock conditions, fence ownership and shared-fence duties, excavation requirements, and private restrictions subject to Missouri law. Applicable requirements depend on the property’s actual facts and the respective authority of the identified offices. Private agreements and recorded rights remain separate from government approvals. If this page conflicts with controlling law, adopted regulations or official requirements, the controlling authorities govern.