FENCE RULES – RAYMORE (CITY), MISSOURI

OVERVIEW

This page covers residential fences inside the incorporated City of Raymore, Missouri, in Cass County. It does not cover unincorporated Cass County property merely because it has a Raymore mailing address.

Raymore’s fence rules depend on fence type, yard and zoning district. Ordinary residential privacy and chain-link fencing generally belongs in side and rear yards at six feet, while four-foot decorative fences have broader placement. Agricultural and Rural Estate districts have different street separations and barbed/electric permissions. Corner geometry, double frontage, sight triangles, easements and drainage can narrow a location further. New fences require the city’s construction-permit process; the model seven-foot exemption does not apply. Pools must satisfy both local zoning and adopted construction standards, alongside separate dog, beekeeping, land-disturbance and floodplain conditions. Updated November 2026.

Quick questionRaymore answer
Permit or approvalA city construction permit is required for new fences and substantive changes. Local administration has no ordinary fence-height exemption; qualifying ordinary repairs have separate treatment.
Typical fence heightOrdinary residential privacy and chain-link fencing is generally 6 feet in the allowed side/rear locations; decorative fences may be 4 feet on any lot portion. Rural Estate, corner, subdivision and pool branches differ.
Placement & property linesFence type and district govern frontage. Corner/double-frontage conditions, sight triangles, easement access, drainage and actual boundary rights remain applicable.
Common fence materialsWood: recognized, with privacy-board limits. Vinyl/PVC: recognized. Chain-link: expressly regulated; not decorative fencing. Pool barriers have additional construction limits.
Important local conditionsFence rules may be further affected by Agricultural/Rural Estate zoning, corner and double-frontage lots, pools, drainage, utility easements, floodplain development, land disturbance, dogs and beekeeping.
Official local resourceRaymore building permit and development applications

The table summarizes the ordinary framework. The sections below preserve the conditions, exceptions and site-specific rules that determine how each requirement applies.

GOVERNANCE

Raymore is a constitutional home-rule city. The City Council adopts municipal requirements within the incorporated city. The Unified Development Code regulates zoning, fence placement, materials, drainage and visibility. The city adopts the 2018 International Residential Code and 2018 International Swimming Pool and Spa Code, with local amendments. The residential code’s administrative chapter is replaced by the city’s own construction-administration provisions; the model code’s seven-foot fence permit exemption therefore does not control Raymore fence permits.

The Building Official administers construction permits and the local construction code. The city’s development-services function administers the Unified Development Code. The Public Works Director is the floodplain administrator and has separate drainage and land-disturbance responsibilities. Municipal zoning, construction, property maintenance and animal-control requirements can apply to the same fence. These public approvals do not determine private ownership, boundary rights or shared costs.

PERMIT AND APPROVAL REQUIREMENTS

• New fences, alterations and replacement: Section 500.075’s local permit requirements cover construction, enlargement, alteration, repair, movement and demolition of buildings or structures, subject to their stated exceptions. The city’s complete building-permit exemption list does not include an ordinary fence-height exemption. A new fence or substantive replacement is not exempt merely because it is six or seven feet high.

• Ordinary repairs: Section 500.020(B) excludes ordinary repairs from application or notice, within its limits. Work affecting public health or general safety is outside that exception, as are the specified structural, exit and service-system changes. Ordinary maintenance and substantive replacement therefore have different permit treatment. The presence of an existing fence does not itself authorize relocation, enlargement or an increase in nonconformity.

• Retaining walls: A building permit is not required for a retaining wall no more than 4 feet high, measured from grade on the low side, unless it supports a surcharge or impounds the listed Class I, II or IIIA liquids. The exception concerns that construction permit; zoning, drainage, guards and any fence above the wall remain separate.

• Swimming pools: Construction permits and pool safety requirements are separate from ordinary yard fencing. The local construction-permit exception is limited to a prefabricated pool accessory to a detached single-family dwelling in Group R3, with inside walls less than 24 inches deep, capacity no more than 5,000 gallons, and installation entirely above grade. A pool meeting only one of those conditions does not satisfy the exception. Zoning’s pool standards apply at a depth of twenty-four inches or more.

• Land disturbance: Chapter 455 requires adequate erosion controls for land disturbance and a permit where the activity creates the regulated erosion condition. Its exceptions include work for building-permit footings, retaining walls and other covered construction; disturbance of 2,000 square feet or less; actual agricultural production; regulated refuse disposal; and lawful mining, under the stated conditions. The separate post-construction stormwater-treatment provisions in Chapter 450 do not replace this erosion-control framework with a universal one-acre grading exemption.

• When a land-disturbance permit is required: The application goes to the Public Works Director with an erosion-control plan, preliminary grading plan, required supporting information and scheduled fee. Issuance follows the required approved preliminary plat or site plan and any required Missouri land-disturbance permit. Controls must be installed and functional before earthwork and inspected by the city; they remain effective until established turf or structural surfaces protect the soil. The required financial security includes the first $5,000 as a cash deposit, with an approved cash, letter-of-credit or bond form for the remaining balance. Security release follows established turf and removal of temporary erosion controls. Those controls include temporary silt fencing where required; they do not establish permanent yard-fence placement.

• Mapped floodplain development: Construction or other covered development in the mapped flood-hazard territory requires a floodplain development permit. Chapter 460 identifies Cass County’s A and AE flood-hazard panels dated January 2, 2013, as amended. The Public Works Director administers the process. The application identifies the parcel, proposed work and relevant flood elevations and plans; applicable federal and state approvals remain separate. A floodplain permit does not waive a drainageway or easement restriction.

• Construction hours and emergency work: Local construction administration separately regulates work between 8 p.m. and 7 a.m., with a special nighttime permit and stated exceptions for emergency, qualifying indoor and specified seasonal work. Where an actual emergency justifies immediate work to protect life, health or safety, the ordinary emergency construction-permit application must follow within 72 hours. This emergency construction procedure is separate from Missouri’s excavation-notice duties.

FENCE PLACEMENT RULES

• Ordinary residential yards: Chapter 440’s fence and visibility standards distinguish fence type and district. In residential districts other than the stated Rural Estate branch, six-foot privacy fences, walls, hedges and chain-link belong in side and rear yards, with no part within 10 feet of the front corner of the house. Four-foot decorative fencing has the broader any-part-of-lot permission. The actual property boundary and recorded rights still control where the lot ends.

• Agricultural and Rural Estate districts: In the Agricultural and Rural Estate districts, a privacy fence, wall or hedge may occupy any lot portion at up to six feet, but must be at least 50 feet from every street right-of-way. Chain-link and decorative fences up to six feet may occupy any lot portion under that branch. The residential schedule also expressly allows six-foot chain-link and decorative fences on any portion of a Rural Estate lot. Acreage or agricultural activity alone does not establish either zoning district.

• Corner lots: For the six-foot rear-yard enclosure, the rear yard is the yard opposite the house’s front door. A corner-lot fence may extend to the required front-yard setback line along the side street under the ordinary corner provision. A narrower exception permits fencing to the property line where adjacent corner lots have adjoining rear yards and houses facing opposite directions, provided neither property has a driveway from the side street. The illustrated exception is tied to that configuration, not every corner property.

• Double frontage and subdivision perimeters: A six-foot rear fence may lie on the rear property line of a double-frontage lot subject to the provision’s platted landscaping-buffer/easement limits and its restriction on direct access to an arterial or collector street. A six-foot decorative fence integrated around an entire subdivision perimeter has a separate exception that excludes individual driveway openings. An individual homeowner’s street frontage does not automatically qualify as a subdivision-perimeter fence.

• Utility easements: A fence may occupy an easement only where the plat does not restrict it. The owner must remove the fence when removal is necessary for city or utility maintenance. If the owner fails to do so, the city or utility may remove it. These provisions do not extinguish the actual easement or guarantee that every easement can be fenced.

• Drainageways, detention areas and swales: A fence may not occupy a drainageway, detention area or engineered swale where it would cause ponding on adjacent property, divert water onto adjoining property or impede the flow of water. A gate or open material does not by itself establish that the proposed fence preserves the required drainage function.

• Retaining walls and streets: Retaining walls must be reasonable in relation to the slope and at least 2 feet from street right-of-way. Walls more than 30 inches above grade need a guard where the building code requires one. A retaining-wall permit exception does not supply an extra fence-height allowance.

• Recorded stream buffers: Final plats and recorded survey documents identify stream buffers and conservation easements. The prescribed buffer note prohibits clearing, grading, construction or vegetation disturbance except as allowed by the approved maintenance plan. A fence proposal within such a buffer remains subject to that site restriction.

• Pool location: The pool location requirements in Section 420.050(B) include a 5-foot property-line separation, no front-yard pool and no pool in an easement, with a separate five-foot pump-location rule. Those requirements concern the pool and equipment; they do not create a five-foot setback for every yard fence.

• Survey markers: Missouri Section 60.355 protects the listed public-land-survey corners, boundary markers, benchmarks and horizontal-control monuments from knowing removal, movement, defacement or destruction, with an exception for a registered land surveyor. The statute provides a class B misdemeanor classification, restoration-cost liability and the affected owner’s stated surveying-cost and attorney-fee remedy. A fence permit does not authorize moving a protected marker.

• Excavation notice: Fence-post excavation, including covered hand digging, augering or driving, is subject to Missouri’s underground-facility law. Section 319.026 requires notice to the notification center at least 2 working days, but not more than 10 working days, before the expected start. The statutory period begins at midnight following receipt; Saturdays, Sundays and legal holidays are not working days. Notice identifies the excavator, responsible person, location, expected start, depth and type of excavation, and the other required site/contact information. The notice service is Missouri 811. Utility locating does not establish property boundaries or grant permission to enter another property.

• Responses and an unanswered notice: Under Section 319.030, participating operators ordinarily respond within two working days unless an extension is agreed. Early excavation requires the law’s confirmation that all facilities have been located. If an operator has not responded after a proper original notice, the excavator must give the prescribed second notice before beginning. The operator then has two hours to mark or contact the excavator; a second notice received by 2 p.m. requires marking that working day, and a later notice requires marking by 10 a.m. the next working day. Only the statute’s failure-to-mark-or-contact conditions allow excavation after that process. An unanswered first notice is not immediate permission to dig, and careful work remains required.

• Ticket life and markings: The notice has an operational life ending at 11:59 p.m. 21 consecutive calendar days from the start date of work. Work may continue within the described area while the notice remains valid and markings remain visible. If work cannot begin within ten working days as described in the request, a relocate request is required before starting. Unusable marks require a remark request with the original notice timing. Excavators must reasonably preserve markings; unnecessary repeat marking caused by a failure of care can create cost liability.

• Care near facilities: The statutory approximate-location strip is ordinarily no wider than the facility width plus two feet on each side. When reinforced concrete, multiple adjacent facilities or other specified unusual conditions interfere with locating, the operator designates a wider approximate area to the best of its ability. Before excavation, the excavator determines best practices for confirming horizontal and vertical location in the actual site conditions; hand or soft digging is used when possible. An incorrectly located or unmarked facility must be reported through the notification center, and the operator must respond within two hours by contact or correct locating. The limited exclusions for specified tillage or temporary markers are not a general exemption for structural fence-post holes.

• Damage and emergency work: Damage, dislocation or disturbance of a facility or its protective items, including trace wires, encasements and protective stakes, must be reported to the notification center. Pipeline contact or damage causing a hazardous-liquid or gas release requires an immediate 911 call. The excavator must not conceal damage or attempt repairs without the facility owner’s authorization. Emergency temporary sewer repairs after notification are narrowly allowed to prevent further damage; they do not remove the reporting duty. A genuine excavation emergency permits necessary work with all reasonable precautions to protect facilities and notice as soon as practical. Within two hours of receiving the emergency notice, the operator must mark or contact the excavator with available information and, if unable to mark within that time, state when marking will occur. Separate Missouri Department of Transportation permission applies to excavation in a state highway or its right-of-way under Section 319.025, subject to its railroad-right-of-way exception.

• Division fences and neighboring land: Missouri’s statutory partition-fence systems address their own livestock and shared-fence circumstances. They are not a city rule requiring every neighbor to pay half of an ordinary yard fence. The applicable system, use and agreement determine any contribution, repair-entry or removal rights; municipal permit approval determines none of those private rights.

FENCE HEIGHT AND VISIBILITY RULES

• Residential privacy fences, walls, hedges and chain-link: The ordinary residential maximum is 6 feet for the specified side- and rear-yard locations, subject to the ten-foot front-house-corner restriction and the corner/double-frontage branches. The zoning rule does not provide a universal six-foot fence permission at every frontage.

• Decorative residential fences: Decorative fences may be 4 feet on any lot portion, or six feet in the allowed side/rear locations subject to the front-house-corner restriction. The decorative category excludes chain-link and is no more than 66 percent opaque; picket, split-rail and wrought-iron designs are examples. Rural Estate has its stated broader location branch.

• Agricultural and Rural Estate heights: The Agricultural/Rural Estate branch permits six-foot privacy fences, walls, hedges, chain-link and decorative fences subject to its different placement rules. The fifty-foot street separation applies to privacy fences, walls and hedges under that branch, rather than every fence type. Its barbed-wire and aboveground-electric permission is a separate material rule.

• Sight triangles: Section 440.030 prohibits a fence in a sight triangle. Section 440.040 independently prohibits view obstructions between 2.5 and 8 feet high in those triangles. The ordinary triangle extends 30 feet along the intersecting street right-of-way lines, or the right-of-way and driveway edge for covered driveway intersections. An arterial-to-arterial or arterial-to-railway intersection uses 50 feet. The street-driveway triangle exception applies to driveways serving single- and two-family dwellings; it does not remove street-intersection triangles. The obstruction-height band is not affirmative permission for a low fence where the separate fence rule prohibits fences.

• Single- and two-family pools: The local zoning barrier is at least 4 feet above exterior grade, with no more than a 4-inch bottom gap. The adopted swimming-pool code also requires forty-eight-inch height throughout the perimeter and for a three-foot horizontal exterior grade area, and narrows the ground gap to two inches over grass, gravel and other nonsolid surfaces. Both systems apply.

• Homeowners-association and multifamily pools: The local zoning standard requires a 6-foot barrier and locking gate for homeowners-association and multifamily pools. The four-foot single-/two-family standard does not reduce that separate minimum.

• Residential beekeeping: The residential accessory-use provisions require a flyway barrier at least 6 feet high, surrounding the hives and at least 6 feet from each hive. It may be a wall, fence, dense vegetation or a combination. This barrier serves the beekeeping use rather than establishing an ordinary yard-fence minimum.

• Boarding stables and riding schools: Section 420.040(A)’s use-specific standards require corrals, training, show, riding, boarding and pasture areas to be enclosed by a fence at least 4 feet high. The stable/corral has separate twenty-foot property-line and two-hundred-foot neighboring-residence conditions. These standards belong to the stated stable/riding-school use, not every residential garden or pet fence.

• Daycare homes and centers: Section 420.030(C) requires outdoor recreational areas used by a daycare home or center to have fencing at least 42 inches high. The facility also remains subject to applicable state and local licensing requirements. This is a use-specific enclosure rule, not the minimum for every residential yard.

MATERIAL AND CONSTRUCTION LIMITS

• Wood: Wood privacy fencing is recognized; boards may be no more than 12 inches wide. The nonresidential prohibition on wood privacy fencing does not ban it in an ordinary residential yard. Decorative wood designs must satisfy that category’s openness and other restrictions.

• Vinyl/PVC: Vinyl and similar materials are recognized for privacy fencing, and vinyl is among the recognized decorative materials. The fence’s category, height and placement remain controlling.

• Chain-link: Chain-link is expressly addressed, with six-foot residential location limits and the Agricultural/Rural Estate branch described above. It is not a decorative fence under the definition. The prohibition on chain-link slats applies to the stated commercial branch; it is not a general residential slat ban.

• Other materials and orientation: Decorative fencing may use wood, vinyl, galvanized or wrought iron and similar materials. The finished side faces outward, with supports on the inside. These material permissions do not waive privacy-board width, decorative opacity or pool-barrier requirements.

• Barbed wire and electric fences: The Agricultural and Rural Estate branch permits barbed wire and aboveground electric fencing. In the other residential districts, barbed wire is prohibited and aboveground electric fencing is allowed only in Rural Estate under the stated exception. Electronic dog collars and containment systems have separate animal-control conditions and are not the same as exposed electric-wire fencing.

• Existing and nonconforming fences: Legally existing nonconforming fences are subject to Chapter 475. The special residential corner-fence rule allows repair or replacement with identical material/type, size and location without increasing another nonconformity. It does not authorize expansion or relocation. Section 545.425 requires accessory structures, including fences and walls, to remain structurally sound and in good repair.

• Pool openings and solid barriers: The adopted 2018 International Swimming Pool and Spa Code generally limits openings to those that reject a 4-inch sphere. Solid barriers may not create handholds or footholds, apart from normal construction tolerances and tooled masonry joints. A barrier mounted on the pool or spa structure has a maximum four-inch gap above that structure.

• Pool horizontal rails and spacing: Local zoning requires horizontal members on the pool side. Where the distance between their tops is less than 36 inches, vertical spacing is at most 1.75 inches; where it is more than 36 inches, vertical spacing is at most four inches. The local sentence does not separately assign the exactly-thirty-six-inch case. The adopted model code independently uses 45 inches between the tops of horizontal members: below forty-five inches, rails are on the pool side and vertical openings and decorative cutouts are at most 1.75 inches; at least forty-five inches permits four-inch vertical spacing, with decorative cutouts still limited to 1.75 inches. A proposal must satisfy both enacted layers. For example, rails forty inches apart remain within the model code’s under-forty-five-inch branch even though the local threshold is different.

• Pool chain-link, diagonal and mesh barriers: Model chain-link mesh is at most 1.75 inches, unless slats fastened at the top and bottom reduce openings to no greater than 1.75 inches (44 mm). Diagonal-member openings are at most 1.75 inches, with their angle no more than forty-five degrees from vertical. Mesh panels are installed to manufacturer instructions; their bottom is no more than one inch above the surface, the panel cannot be lifted more than four inches and cannot allow a four-inch sphere underneath. Section-attachment devices are at least forty-five inches above grade and provide the stated security of a spring-retained safety hook or its equivalent, sleeves in a patio surface are nonconductive, and mesh cannot be installed on top of an onground residential pool.

• Pool clear areas: The 2018 model code requires 36 inches of clear space outside the barrier between it and permanent structures or equipment that could facilitate climbing. The pool/spa side of the barrier is at least 20 inches from the water’s edge.

• Pool gate direction and latches: Local zoning permits inward or outward gates, but the independently adopted model code requires pedestrian gates to open outward, away from the pool. An outward-opening gate satisfies both direction provisions. Gates are self-closing and self-latching and accommodate a lock. Local zoning places the release on the pool side at least 6 inches below the gate top, with openings no more than one-half inch within eighteen inches. The model code separately requires a release below fifty-four inches to be on the pool side at least three inches below the top, with the same nearby half-inch opening limit. Both requirements remain applicable; the local six-inch condition is not displaced by the model three-inch minimum. Service gates remain locked when not in use; a double-gate assembly has one leaf secured in place and the other secured to it as required.

• Pool covers and house-wall alternatives: The adopted model code’s barrier exception concerns a spa or hot tub with an ASTM International standard F1346 lockable safety cover, or a swimming pool with an ASTM International F1346 powered safety cover. Its dwelling-wall alternative requires qualifying Underwriters Laboratories standard 2017 alarms on relevant doors and windows with sills below forty-eight inches, a qualifying safety cover, or an approved equivalent providing the required protection. Alarm deactivation switches have the applicable fifty-four-inch minimum or accessible forty-eight-to-fifty-four-inch branch. Local zoning separately exempts a spa or hot tub with the specified solid locking safety cover from its pool subsection. A model alternative does not automatically waive an independent zoning barrier requirement.

• Onground pools and natural barriers: A pool wall may form the model barrier only where the manufacturer permits that use, the wall has the required forty-eight-inch height and openings, and installation follows manufacturer instructions. Ladders or steps must be capable of being secured, locked or removed to prevent access, unless surrounded by a compliant barrier; the resulting opening restrictions still apply. A natural water edge is a barrier only where the pool/spa abuts a lake or natural water body, public access is not permitted along the shoreline and the required barrier extends at least eighteen inches beyond the water’s edge. Rock, terrain and other natural features require approval as equivalent barriers.

• Dogs left in the yard: Under Section 205.300, an unsupervised yard dog must be confined by a suitable enclosed fence or securely enclosed and locked pen, structure or run. The locked pen/run is at least 5 by 10 feet, has secure sides and top, and provides weather protection. If it has no bottom secured to the sides, those sides extend at least 12 inches into the ground. An electronic fence/collar must keep the dog at least 5 feet from a public street, sidewalk or property line contiguous to neighboring property. Such systems cannot confine a dog found dangerous and cannot control a dog off its keeper’s property.

• Beekeeping and horse-use conditions: Residential hives have separate five-foot property-line and twenty-five-foot neighboring-residence separations and the prescribed ownership/responsibility posting. Hive ground coverage and height are limited to six square feet and six feet, and hives cannot extend above the flyway barrier. More than two hives requires the stated Agricultural/Rural Estate or three-acre branch. Stable/riding-school fencing also accompanies drainage and corral-location requirements; those use conditions remain separate from ordinary fence materials.

• Small wind-energy systems on residential property: For a covered small wind-energy system, the first 12 feet of its tower must be unclimbable by design, or the tower must have a 6-foot unclimbable fence with a self-locking gate. The provision does not apply to a roof-mounted system. This equipment barrier is separate from ordinary yard fencing.

• Livestock containment: Missouri Section 270.010 separately prohibits an owner from permitting horses, mules, asses, cattle, swine, sheep or goats to run at large outside the owner’s enclosure. It provides for restraint of loose stock, reasonable taking-up, keeping and feeding costs, and actual damages. For a public-road or highway accident, the owner is not responsible under that provision if the owner establishes that the animals escaped through no fault or negligence of the owner. This containment duty can matter on an agricultural or horse property; it does not itself select a partition-fence system or require a neighbor to share fence costs.

PRIVATE RESTRICTIONS

Recorded covenants, subdivision restrictions, homeowners-association architectural rules, private easements and enforceable boundary or maintenance agreements may add obligations beyond public fence rules. The actual instrument and applicable Missouri law determine a restriction’s scope; there is no universal private height or material rule for every Raymore property.

A government permit does not determine the property boundary, confer ownership of a shared fence, settle a cost allocation or authorize interference with another person’s access rights. Statutory partition-fence obligations are separate from a private agreement. The age or position of an existing fence alone does not resolve title, and a fence across an easement does not automatically become permissible merely because it has a gate.

REVIEW AND ENFORCEMENT CONTEXT

Fence issues are typically reviewed during permit or approval review when required, and through complaint-based code enforcement. Examples include:

• Permits and site conditions: New fence construction, substantive replacement, ordinary-repair classification, retaining walls, erosion-control work and mapped floodplain development.

• Placement and visibility: Residential yard and corner configuration, double frontage, sight triangles, utility access, easement restrictions and drainageway obstruction.

• Construction and upkeep: Fence orientation, restricted materials, pool barriers and gates, nonconforming-fence changes, deteriorated fences and required animal enclosures.

• Separate private matters: Boundary, shared ownership, recorded covenants, easement scope and neighbor-cost disputes remain distinct from city permit and code enforcement.

USING THIS INFORMATION

This page provides general orientation on how residential fence rules are structured and applied within the City of Raymore, Missouri. Updated November 2026.

In addition to local fence rules, certain Missouri laws apply statewide. See Statewide Fence Laws in Missouri.

It is not legal advice and does not replace official statutes, ordinances, orders, permits, certificates, development approvals, applicable building-code requirements, surveys, recorded documents or professional guidance. Rules and interpretations may change, and application may vary with the identified municipality, including its actual municipal or county class, charter, adopted program or special district, and each function’s verified territory, the authority responsible for each issue, current code requirements and amendments, zoning and site conditions, subdivision or plat conditions, easements, rights-of-way, drainage and floodplain requirements, historic or design districts, pool use, agricultural or livestock conditions, fence ownership and shared-fence duties, excavation requirements, and private restrictions subject to Missouri law. Applicable requirements depend on the property’s actual facts and the respective authority of the identified offices. Private agreements and recorded rights remain separate from government approvals. If this page conflicts with controlling law, adopted regulations or official requirements, the controlling authorities govern.